500 bar 400T stroke double acting hydraulic oil cylinder for special projects

The carrying capacity of the700 bar RRH type 200 ton double acting hollow hydraulic jack should be greater than 1.2 times the gravity of the weight; the minimum height of the hydraulic jack is suitable. For the convenience of taking out, the minimum height of the 700 bar RRH type 200 ton double acting hollow hydraulic jack should be adapted to the clearance at the bottom of the weight. When the bolster supports the heavy objects during the landing, the lifting height of the hydraulic jack is greater than the sum of the ties and the occipital deformation.

The carrying capacity of the 200Ton single acting low height lock nut hydraulic cylindershould be greater than 1.2 times the gravity of the weight; the minimum height of the 200Ton single acting low height lock nut hydraulic cylinder is suitable. For the convenience of taking out, the minimum height of the hydraulic jack should be adapted to the clearance at the bottom of the weight. When the bolster supports the heavy objects during the landing, the lifting height of the hydraulic jack is greater than the sum of the ties and the occipital deformation.

High tonnage double acting pull hydraulic cylinder produced by Lead Equipment have undergone strict quality control before leaving the factory, so they can display their good performance when they reach the unit. Even so, we still have to spend a section to explain its post-maintenance. Because the high tonnage double acting pull hydraulic cylinder for concrete frame are placed for a long time, the internal parts will produce some minor changes. These changes are what we usually need to pay attention to. Don’t wait until you use it to remember it.

Lead Equipment Co., Ltd is a professional light post tension equipment jack supplier, we have light post tension equipment jack for sale, we can supply different tonnage and stroke light post tension equipment jack.

The double acting high pressure big bore hydraulic cylinders should be placed flat before use, can not be skewed, and the bottom should be leveled. Beware of the foundation subsidence or load deviation, the double acting high pressure big bore hydraulic cylinders can be tilted or tipped over, and can be extended with a tough pillow or steel plate at the bottom of the hydraulic jack. Pressure-bearing area to prevent death or slippage; do not use oily wood or steel plate as a cushion to prevent slipping when force is applied, and safety incidents occur; the weight should be lifted and the position must be safe and solid. Anti-damage equipment (hydraulic jack).

Our Lead equipment entered the hydraulic tool industry earlier, specializing in scientific research and development, production and operation of double acting high tonnage 300 tons hydraulic ram jack, electric pump for 30 years. Products are widely used in road, railway, bridge, city interchange, hydropower station dam, rock and soil anchorage, high-rise buildings, slope reinforcement, tunnel and, our double acting high tonnage 300 tons hydraulic ram jack have been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on.

The carrying capacity of the ultra thin single acting hydraulic oil cylinder jack should be greater than 1.2 times the gravity of the weight; the minimum height of the ultra thin single acting hydraulic oil cylinder jack is suitable. For the convenience of taking out, the minimum height of the ultra thin single acting hydraulic oil cylinder jack should be adapted to the clearance at the bottom of the weight. When the bolster supports the heavy objects during the landing, the lifting height of the hydraulic jack is greater than the sum of the ties and the occipital deformation.

Double acting heavy duty hydraulic jacks cylinder and electric oil pump for sale to. The tonnage of this hydraulic jack is 630 tons with 500mm stoke. Because our double acting hydraulic jack own have the follow advantages, it is accepted by many different customers. Double acting heavy duty hydraulic jacks cylinder is suitable for high-tonnage lifting operations, and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, its hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

Hydraulic jack cylinder can be equipped with a two-way manual oil pump or a two-way electric oil pump. Because of the through hole in the middle, the hollow jack not only has the lifting capacity of a general hydraulic jack, but also has the stretching and tensioning functions that the ordinary jack does not have. The through hole allows cables, steel ropes and other shafts to pass through. The hollow roof has double functions and hydraulic retraction. Hydraulic jack cylinder is the first choice for various large-scale projects. It has the characteristics of convenient operation and control. The new technology and structure make the hollow roof Jacks are safer and last longer.

In order to guarantee our double acting 250 ton hydraulic jack with hydraulic power pack can be exported to European countries, we apply two CE Certificate for our double acting 250 ton hydraulic jack and electric power pack. So it is no any problem that our hydraulic jack for sale to European countries.

The carrying capacity of the Single acting high tonnage lock nut hydraulic cylinder should be greater than 1.2 times the gravity of the weight; the minimum height of the hydraulic jack is suitable. For the convenience of taking out, the minimum height of the hydraulic jack should be adapted to the clearance at the bottom of the weight. When the bolster supports heavy objects during the landing, the lifting height of the Single acting high tonnage lock nut hydraulic cylinder is greater than the sum of the ties and the occipital deformation.

In the word, the YDC series post tension stressing equipment jack’ performance is improved, and widely used in pre-stressing and post stressing construction. If you are interested in post tension stressing equipment jack, pls contact us freely.

Leadcrete brand high quality single acting steel hydraulic cylinder price and electric oil pump for sale to. The tonnage of this hydraulic jack is 300 tons with 500mm stoke. Because our high quality single acting steel hydraulic cylinder price own have the follow advantages, it is accepted by many different customers. Double acting hydraulic jack is suitable for high-tonnage lifting operations, and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, its hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

Super high-pressure small hydraulic piston cylinder should be placed flat before use, can not be skewed, and the bottom should be leveled. Beware of the foundation subsidence or load deviation, the hydraulic jack can be tilted or tipped over and can be extended with a tough pillow or steel plate at the bottom of the super high-pressure small hydraulic piston cylinder. Pressure-bearing area to prevent death or slippage; do not use oily wood or steel plate as a cushion to prevent slipping when force is applied, and safety incidents occur; the weight should be lifted and the position must be safe and solid. Anti-damage equipment (hydraulic jack).

New or long-term single-acting hollow hydraulic jacks, because there is more air in the cylinder, when the piston is used, the piston rod may show a slight jump phenomenon. The single acting hollow hydraulic jacks can be reciprocated 2-3 times without load to eliminate The air inside the cavity. Long-term idle jacks, because the seals do not work for a long time, causing the seals to harden, thus affecting the service life of the hydraulic jacks. Therefore, when the hydraulic jacks are not in use, the hydraulic jacks should be reciprocated 2-3 times per month.

Double-acting hydraulic cylinder and electric oil pump for sale to Russia. The tonnage of this hydraulic jack is 200 tons with a 200mm stroke. If you want to know more double-acting hydraulic cylinder information, please contact us!

Double acting hydraulic lift cylinders for sale own have the follow advantages, it is accepted by many different customers. Double acting hydraulic lift cylinders for sale is suitable for high-tonnage lifting operations, and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, its hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

Double acting high tonnage hydraulic cylinders for pile foundation testing. Double acting high tonnage hydraulic cylinders have the characteristics of large output force, light weight and long-distance operation. Zhengzhou Lead Equipment will continue to provide customers with high quality double acting high tonnage hydraulic cylinders, as well as provide you with the first time after-sales service, welcome your call to visit!

Factory supply low price flange type hydraulic cylinder is suitable for high-tonnage lifting operations, and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, factory supply low price flange type hydraulic cylinder hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

Double acting hydraulic jack is suitable for high-tonnage lifting operations, and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, its hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

The carrying capacity of the 250t single acting super thin jacks hydraulic should be greater than 1.2 times the gravity of the weight; the minimum height of the hydraulic jack is suitable. For the convenience of taking out, the minimum height of the 250t single acting super thin jacks hydraulic should be adapted to the clearance at the bottom of the weight. When the bolster supports the heavy objects during the landing, the lifting height of the 250t single acting super thin jacks hydraulic is greater than the sum of the ties and the occipital deformation.

Lead Equipment Co., Ltd is a professional manufacturer of hydraulic cylinder for pulling with power pack in China. We could make kinds of standard and non-standard hydraulic cylinders for pulling with the oil pump.

600 ton hollow hydraulic oil cylinder can be used for the maintenance of large machinery, the overall lifting of the bridge, the maintenance of the hydropower plant gate, the lifting of the steel structure and the installation of supporting equipment. If you want to know more 600 ton hollow hydraulic oil cylinder information, please contact us!

Our Lead equipment entered the hydraulic tool industry earlier, specializing in scientific research and development, production and operation of 400tons stroke 300mm double acting hydraulic jack, electric pump for 30 years. Products are widely used in road, railway, bridge, city interchange, hydropower station dam, rock and soil anchorage, high-rise buildings, slope reinforcement, tunnel and, our 400tons stroke 300mm double acting hydraulic jack have been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on.

We will recommend different 400 ton hydraulic jack price for customers according tonnage, stroke and application. These are pictures of 400 ton hydraulic jacks purchased by customers before, and the color, tonnage and stroke can be customized. If you want to know 400 ton hydraulic jack price, welcome to contact!

700 bar steel double acting 300 ton hydraulic hollow jack combines all the design features of single-acting and the superiority of double-acting design, thereby improving the operation and use speed, especially in the relatively long stroke operation. The 700 bar steel double acting 300 ton hydraulic hollow jack has a through hole in the piston center, which is widely used in nuclear power plants, tunnel engineering, underground engineering, construction and other occasions to realize the pre-tightening process, and can also be used in other similar needs.

If multiple single acting flat hydraulic jack are used to lift the same equipment, the same type of single acting flat hydraulic jack should be used, and the sum of the additional lifting weight of each hydraulic jack should not be less than 1.5 times the gravity of the equipment. Hydraulic jacks should be wiped clean before use, and should check whether the components can be active, whether there is any damage, avoid loading the quick joints when there is load, to prevent the occurrence of faults and damaged parts.

Double acting hydraulic cylinder/jack/ram is a power tool. To avoid the possibility of a major injury, read all instructions carefully before using a double-acting hydraulic cylinder/jack/ram, warnings and precautions, and comply with the safety measures to avoid damage to persons or equipment occurring when the operation of the device!

250 ton hydraulic cylinder for sale, Zhengzhou Lead Equipment will continue to provide customers with high quality 250 ton hydraulic cylinder, as well as provide you with the first time after-sales service, welcome your call to visit!

First, 100 ton single acting hydraulic mini lifting jack description: The single acting hydraulic jack with pump has a large stroke and a strong lifting capacity, and is the best choice for maintenance, manufacturing, construction and other operations. All models can be processed according to customer requirements, and the bottom is designed with mounting holes, which makes the installation and positioning convenient.
Second, the characteristics 100 ton single acting hydraulic mini lifting jack with pump: The piston part is welded with copper, the piston rod is coated with hard chrome, never pulls the cylinder, and the wear resistance is strong. High temperature baking varnish, surface abrasion resistance, corrosion resistance and impact. Single-acting design, spring retraction (reset). High strength alloy steel is durable.