Grout Pump

Key Features of a Jet Grouting Triplex Pump:
High-Pressure Delivery: Jet grouting requires the injection of grout at very high pressures to effectively erode and mix the in-situ soil. A triplex pump is capable of delivering the necessary pressure, often in the range of 20 to 50 MPa (or higher, depending on the specific application).
Consistent Flow Rate: The three cylinders of the triplex pump work in a coordinated manner to ensure a consistent flow rate of grout, which is crucial for maintaining the quality and uniformity of the grout columns.
Durability and Reliability: Jet grouting pumps are subjected to harsh operating conditions, including abrasive grout mixtures and high pressures. A triplex pump is designed to withstand these conditions, with robust construction and high-quality components to ensure long-term reliability.
Adjustable Parameters: The pump should allow for adjustments in pressure, flow rate, and other parameters to accommodate different soil conditions and project requirements.
Efficiency and Performance: A well-designed triplex pump will offer high efficiency and performance, minimizing energy consumption and maximizing the effectiveness of the jet grouting process.

Jet grouting requires high-pressure pumps to inject grout at pressures typically ranging from 20 to 50 MPa (2900 to 7250 psi), depending on the soil conditions and desired grout column diameter. The pump must be capable of delivering a consistent flow rate to ensure uniform mixing of the grout with the soil.

The Jet Grouting Pump is a critical component of the jet grouting system, responsible for delivering the grout under high pressure. The pump must be capable of generating pressures in the range of 20-50 MPa to ensure effective soil erosion and grout penetration. The pump should allow for precise control of the grout flow rate to match the specific requirements of the project (e.g., soil type, desired column diameter).

Applications of high pressure cement grouting station: Soil Stabilization: Improving bearing capacity of weak or compressible soils. Groundwater Control: Sealing leaks in dams, tunnels, or basements. Structural Repair: Filling voids or cracks in concrete structures. Mining and Tunneling: Reinforcing rock masses and preventing water ingress. Foundation Underpinning: Strengthening existing foundations or correcting settlement issues.

Diesel jet grouting pump uses diesel engine as power source, which enables the equipment to work normally in remote areas without electricity supply or unstable electricity supply. It can generate enough pressure to achieve efficient jet grouting operation, usually reaching pressure level of tens or even hundreds of MPa, ensuring that the grout can penetrate deep into the cracks of the formation. It is suitable for various types of soil conditions, whether it is loose sand or hard rock, and the construction parameters can be adjusted according to the actual situation. Due to the changeable and harsh use environment, diesel jet grouting pumps are generally made of strong and durable materials and are strictly tested to ensure their reliability and long life.

Due to the standard container design, this type of container type grouting pump can be easily transported by road, rail or sea to any place where it is needed, and can be put into work quickly after arriving at the site. It can handle various types of grouting materials, such as cement slurry, chemical slurry, etc., and is suitable for different engineering needs, including foundation reinforcement, waterproofing, crack filling, etc.

A Container Type Grout Injection Pump is a specialized piece of equipment designed for injecting grout into the ground or rock formations, with the pump and its associated components housed within a containerized structure. They are mainly used for engineering applications such as enhancing structural stability, preventing leakage, and improving foundation conditions.

A cement grouting pump is used to inject cement-based grout into the ground or rock formations around a tunnel. This process helps to stabilize the tunnel, fill voids, prevent water ingress, and reinforce the surrounding soil or rock.

Regarding the jet grout pump in container, it is a high-pressure grouting pump capable of generating up to 100 bar pressure, mainly used in engineering projects that require high-pressure grouting.

Jet grout pump for self drilling injection is a grouting equipment specifically designed for self drilling jet grouting technology. This technology combines drilling and grouting processes, using a self drilling grouting pipe (usually with a nozzle) to drill holes in rock and soil, while injecting high-pressure grout into the hole to achieve grouting reinforcement or waterproofing purposes.

Jet grouting pump is a high-pressure grouting equipment specifically used for grouting engineering. It can inject grout (such as cement slurry, chemical grout, etc.) into rock and soil under high pressure to achieve reinforcement, waterproofing, anti-seepage and other purposes. Jet pumping pumps drive fluid under high pressure, increasing velocity and decreasing pressure as it passes through the nozzle, forming a low-pressure zone (suction chamber). When the pressure in the low-pressure zone is lower than the pressure of the suction fluid, the suction fluid is carried into the injector body, mixed with the driving fluid, and discharged. During this process, the kinetic energy of the fluid is converted into pressure energy, forming a high-pressure slurry, which is then injected into the rock and soil through a grouting pipe.

Jet grout pump for double fluid system is a special grouting equipment designed specifically for handling dual fluid grouting systems. This pump is capable of simultaneously or separately processing two fluids (usually high-pressure water and solidifying agents such as cement slurry or other chemical slurries), and injecting them into the rock and soil after mixing them evenly during the grouting process.

Jet grouting pump is a high-pressure grouting equipment mainly used to inject grout (such as cement slurry, chemical grout, etc.) into rock and soil under high pressure to achieve reinforcement, waterproofing, anti-seepage and other purposes. Its characteristics include high pressure, high flow rate, adjustable grouting parameters, and good wear resistance and corrosion resistance.

The high pressure groove pump is integrated inside a standard container, with a compact structure and high integration, making it easy for long-distance transportation and quick on-site installation. High pressure groove pump in container can provide high working pressure, usually up to several hundred bars or more, ensuring that the slurry can penetrate deep into the rock and soil mass, forming an effective reinforcement layer. The flow rate of the grouting pump can be adjusted according to the needs of the project to meet the requirements of different grouting processes. Equipped with advanced automation control system, it can achieve precise control and real-time monitoring of grouting parameters, improve grouting efficiency and construction quality. Due to the use of containerized design, the equipment has good overall mobility and can be easily transferred from one construction site to another.

The working pressure of 600-800 bar enables the High press jet grouting pump to penetrate deeper rock and soil layers, achieving effective grouting reinforcement. According to engineering needs, the flow rate of the grouting pump can be adjusted to meet the requirements of different grouting processes. The design of modern high-pressure jet grouting pumps emphasizes the compactness of the structure, making it easy to transport and install. The High press jet grouting pump 600-800 bar adopts an advanced control system, making the operation of the grouting pump more convenient and efficient.

Jet grouting pump, also known as grouting machine or grouting pump, is a device used to inject various grouts such as cement slurry, water glass, clay slurry, polyurethane, accelerators, etc. into media such as foundations, rocks, walls, etc. under high pressure. A 100bar jet grouting pump refers to a grouting pump whose working pressure can reach 100 bar (MPa). This type of pump is usually used in scenarios that require high grouting pressure, such as deep foundation treatment, tunnel reinforcement, slope stability, and other engineering projects.

A high-pressure plunger grout pump is a specialized piece of equipment designed for injecting grout materials into substrates at elevated pressures, typically used in demanding construction and repair applications. These pumps are chosen for their ability to handle thick, viscous grouts and inject them into tight spaces or deep layers of soil or concrete with precision and control.

Grouting injection pump for sale is an indispensable equipment in geological engineering, civil engineering, and hydraulic engineering. By selecting appropriate models and configurations, it is possible to meet the needs of different engineering projects. Meanwhile, pay attention to the performance, price, transportation, and packaging information of the equipment to ensure that the purchased equipment meets your expectations.

As the demand for advanced construction equipment rises globally, exporting grout pumps has become essential for meeting diverse project needs across different regions. A grout pump is a vital piece of machinery used for injecting grout mixtures into various substrates to enhance stability and strength.

Are you in need of a reliable and efficient grout pump for your construction projects? Look no further! Our double plunger grout pump for sale is the perfect solution for all your grouting needs. This high-performance equipment is designed to handle a variety of grout mixtures, ensuring precise and consistent application every time. Whether you are working on soil stabilization, tunnel construction, or foundation repair, our double plunger grout pump will help you achieve optimal results. Don’t miss out on this opportunity to enhance your project’s efficiency and quality.

The High Pressure Grouting Pump is an indispensable piece of equipment in the realm of foundation reinforcement and rehabilitation engineering. Specifically designed to address stability and waterproofing issues in structures, it plays a pivotal role in enhancing the resilience and longevity of buildings, bridges, and various infrastructure projects.

Grout Cement Injection machine is mainly used for ground/underground construction, such as highways, railways, water and electricity, construction, mining etc.

The LGH75/100PI-E is a vertical grout pump that allows for step-less adjustments of grouting pressure and output. It can also be customized to suit your specific needs. This grout pump is designed to handle various grouting materials, including cement mixture, mortar/plaster, bentonite, and other additives.

Compact high pressure grout pump offers high-speed operation with a flow rate ranging from 0 to 75L/min and a pressure of 0 to 50 Bar. It also has a low-speed option available with a flow rate ranging from 0 to 40L/min and a pressure of 0 to 100 Bar.

Jet grouting triple pump refers to a triple pump dedicated to the jet grouting process, which usually consists of three independent pumps, namely a water pump, compressor, and concrete pump.

Jet grouting pump is a kind of machine equipment commonly used in the fields of soil treatment, concrete reinforcement and geological exploration. It processes the soil by spraying a mixture of liquid and solid materials at high speed to form a solid formation. Jet grouting pump is generally composed of pump body, mixing head, measuring instruments, control equipment, etc., and parameters such as flow, pressure, and ratio can be adjusted freely according to engineering needs to meet different reinforcement needs.

There are several advantages to installing a jet grouting pump in a container. First, it provides protection and security for the pump during transportation and storage. Second, it increases the safety of the operation by containing the pumping process within an enclosed area. This helps prevent accidents and minimizes the impact of any spills or leaks. Third, the jet grouting pump in container is more versatile as it can be easily transported to different job sites and customized for specific projects. It can also be equipped with additional accessories and components, such as generators and storage tanks, to provide a complete and self-contained pumping system. 

High pressure jet grout pump can be used for a variety of applications, such as ground improvement, soil stabilization, and concrete repair. Jet grouting involves using a high-pressure pump to inject grout into the soil to create columns or walls of grout. This technique can be used to stabilize soils, create underground barriers, and repair concrete structures by filling voids and cracks.

In addition, High-pressure injet pumps can be used for various applications such as concrete repair, soil stabilization and tunneling. Different jobs require different flows and pressures, which can be achieved by adjusting the parameters of the High-pressure injet pump. For example, patching concrete requires low flow and high pressure, while soil stabilization requires high flow and moderate pressure. The high-pressure injet pump has the advantage of adjustable parameters, so it can be adapted to different application scenarios.

Putting the high pressure grouting pump in the container has several advantages. For example, containers provide protection and security for equipment, making it easier to transport and ship to different locations. Additionally, the container provides a customizable space for the configuration of the device and accommodates additional accessories that may be required for a particular project.

High pressure grouting pump in container is essential to ensure it meets specific project requirements and is able to deliver the desired grouting results. These pumps are often adjustable in pressure, flow rate and other parameters, making them suitable for a variety of grout types and mix designs.