500 ton double acting hydraulic jack price for sale

The China center hole hydraulic jack is usually used to the construction of bridge and buildings, railway and subway, water conservancy and hydropower engineering and China center hole hydraulic jack is suitable for the tension of group anchors with 1860-2000 sizes, Φ15.24, Φ12.7 strands.

250 ton double acting hydraulic jack cylinder for lifting and electric pump must be on a sturdy surface so that it can withstand the load, the load must be placed in the center, covering all pistons, can only load stationary object. If the hydraulic oil pump is damaged, deformed, or in need of repair, do not use! When the 250 ton double acting hydraulic jack cylinder for lifting reciprocating action must be extended without hindrance, to ensure complete phase contact, only when all the piston is fully retracted in order to pump the fuel.

Lead is a 500 ton double acting hydraulic lift cylinders supplier. When jacking work, find the focus point of the heavy object, adhere to the balance of the weight, and prevent the heavy object from falling slantingly during the lifting operation. Only by locating the focus point can the heavy object be lifted smoothly and safely. After the 500 ton double acting hydraulic lift cylinders completes the lifting operation, other solid objects should be used for support, not only the jack support, to prevent damage to the jack.

Single-acting hydraulic jack and electric pump must be on a sturdy surface so that it can withstand the load, the load must be placed in the center, covering all pistons, and can only load stationary objects. If the hydraulic oil pump is damaged, deformed, or in need of repair, do not use it! When the single acting hydraulic jack reciprocating action must be extended without hindrance, to ensure complete phase contact, only when all the piston is fully retracted in order to pump the fuel.

Our Lead equipment entered the hydraulic tool industry earlier, specializing in scientific research and development, production and operation of 300 ton cheap double acting high tonnage hydraulic cylinder jack, electric pump for 30 years. Products are widely used in road, railway, bridge, city interchange, hydropower station dam, rock and soil anchorage, high-rise buildings, slope reinforcement, tunnel and, our 300 ton cheap double acting high tonnage hydraulic cylinder jack have been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on.

Why so many customers to chose Lead double acting two-way jack hydraulic hollow price for sale? The following features solve all of your question.
More accurate
Perfect in workmanship
More beautiful
Anti-rust durable
Quality guarantee
More competitively price
If you want to know more double acting two-way jack hydraulic hollow price for sale,please contact us!

The 700bar Hydraulic Jack Pump is a high pressure hydraulic pump specifically designed to drive hydraulic jacks, providing working pressures up to 700 bar (approximately 10,000 psi).

The special guide ring design can withstand an eccentric load of up to 5% of the rated load capacity of the double acting micro hydraulic cylinder made in China. Double acting micro hydraulic cylinder made in China is equipped with a dust-proof ring to prevent dust from entering the cylinder. All models include quick connectors and dust caps. Up to 13 seals inside the cylinder to ensure sealing performance and extend service life.

High quality single-acting lifting hydraulic cylinder description: The high quality single-acting lifting hydraulic cylinder with pump has a large stroke and a strong lifting capacity, and is the best choice for maintenance, manufacturing, construction and other operations. All models can be processed according to customer requirements, and the bottom is designed with mounting holes, which makes the installation and positioning convenient.

We have many types of double acting piston hydraulic lifting jack for synchronous lifting pushing: thin jacks, single-acting thin jacks, thin hydraulic cylinders are all thin hydraulic jacks–lead company professional planning to build. Different types of double acting piston hydraulic lifting jack for synchronous lifting pushing use methods and operating precautions are not the same, thin hydrualic jacks, hydraulic cylinder more volume Small, with more working ability, especially in the local application with narrow spatial orientation, and has the functions of simple and flexible, strong top force.

Double-acting hollow hydraulic jack is suitable for high-tonnage lifting operations, and requires high-precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, Double acting hollow hydraulic jack hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

The design of CLL cheap single acting self-locking type hydraulic jack is the perfect combination of hydraulic principle and mechanical principle. Cheap single acting self-locking type hydraulic jack has thread in the whole stroke range of volcano rod. After fully lifting, the self-locking nut can be unscrewed until it is against the cylinder block. Free lock nut and the cylinder is stressed, so that the oil pump can be removed, which is especially suitable for the continuous and test operation of the truss and truss.

First, 150 ton high technical support single acting high tonnage hydraulic jack description: The single acting hydraulic jack with pump has a large stroke and a strong lifting capacity, and is the best choice for maintenance, manufacturing, construction and other operations. All models can be processed according to customer requirements, and the bottom is designed with mounting holes, which makes the installation and positioning convenient.
Second, the characteristics 150 ton high technical support single acting high tonnage hydraulic jack with pump: The piston part is welded with copper, the piston rod is coated with hard chrome, never pulls the cylinder, and the wear resistance is strong. High temperature baking varnish, surface abrasion resistance, corrosion resistance and impact. Single-acting design, spring retraction (reset). High strength alloy steel is durable.

The load return high tonnage lock nut hydraulic lifting cylinder combines with the functions of other jacks. The safety of the load return high tonnage lock nut hydraulic lifting cylinder is suitable for the long-term extension of the piston to support the load. The load return high tonnage lock nut hydraulic lifting cylinder maintains mechanical load for long periods of time. Available in low-profile, lightweight or high-tonnage models with capacities ranging from 20 to 1000 tons and stroke lengths from 45 mm to 300 mm.

Double-acting high-tonnage hydraulic cylinder is a power tool. To avoid the possibility of a major injury, read all instructions carefully before use, warnings, and precautions, and comply with the safety measures to avoid damage to persons or equipment occurring when the operation of the device!

The double acting hollow plunger hydraulic jack for lifting can be equipped with a two-way manual oil pump or a two-way electric oil pump. Because of the through hole in the middle, the hollow jack not only has the lifting capacity of a general hydraulic jack, but also has the stretching and tensioning functions that the ordinary jack does not have. The through hole allows cables, steel ropes and other shafts to pass through. The hollow roof has double functions and hydraulic retraction. The double acting hollow plunger hydraulic jack for lifting is the first choice for various large-scale projects. It has the characteristics of convenient operation and control. The new technology and structure make the hollow roof jacks safer and last longer.

New or long-term single-acting hollow hydraulic jacks, because there is more air in the cylinder, when the piston is used, the piston rod may show a slight jump phenomenon. The single acting hollow hydraulic jacks can be reciprocated 2-3 times without load to eliminate The air inside the cavity. Long-term idle jacks, because the seals do not work for a long time, causing the seals to harden, thus affecting the service life of the hydraulic jacks. Therefore, when the hydraulic jacks are not in use, the hydraulic jacks should be reciprocated 2-3 times per month.

If multiple 200 ton double acting hydraulic hollow ram are used to lift the same equipment, the same type of 200 ton double acting hydraulic hollow ram should be used, and the sum of the additional lifting weight of each 200 ton double acting hydraulic hollow ram should not be less than 1.5 times the gravity of the equipment. Hydraulic jacks should be wiped clean before use and should check whether the components can be active, whether there is any damage, avoid loading the quick joints when there is load, to prevent the occurrence of faults and damaged parts.

Double acting heavy duty hydraulic jacks cylinder and electric oil pump for sale to. The tonnage of this hydraulic jack is 630 tons with 500mm stoke. Because our double acting hydraulic jack own have the follow advantages, it is accepted by many different customers. Double acting heavy duty hydraulic jacks cylinder is suitable for high-tonnage lifting operations, and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, its hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

Lead equipment specializes in the production of hot sell single acting high tonnage lock nut hydraulic jack, providing you with 50 ton, 100ton, 200ton, 300ton, 500ton, 600ton, 800ton, 1000ton and 1500 tons of hot sell single acting high tonnage lock nut hydraulic jack, we have many types for you choose, we can also customize according to your requirements.

First, 500 ton single acting hydraulic ram jack description: The single acting hydraulic jack with pump has a large stroke and a strong lifting capacity, and is the best choice for maintenance, manufacturing, construction and other operations. All models can be processed according to customer requirements, and the bottom is designed with mounting holes, which makes the installation and positioning convenient.
Second, the characteristics 500 ton single acting hydraulic ram jack: The piston part is welded with copper, the piston rod is coated with hard chrome, never pulls the cylinder, and the wear resistance is strong. High temperature baking varnish, surface abrasion resistance, corrosion resistance and impact. Single-acting design, spring retraction (reset). High strength alloy steel is durable.

Double acting low height hydraulic cylinder should be placed flat before use, can not be skewed, and the bottom should be leveled. Beware of the foundation subsidence or load deviation, the hydraulic jack can be tilted or tipped over, and can be extended with a tough pillow or steel plate at the bottom of the double acting low height hydraulic cylinder. Pressure-bearing area to prevent death or slippage; do not use oily wood or steel plate as a cushion to prevent slipping when force is applied, and safety incidents occur; the weight should be lifted and the position must be safe and solid. Anti-damage equipment (hydraulic jack).

Double acting high tonnage hollow hydraulic cylinder builtin pressure relief valve to prevent overload, and the design of the security device. The connector of double acting high tonnage hollow hydraulic cylinder use high pressure rubber hose and threaded joint, it has the advantages of fast operation, and overcomes the shortcomings of the traditional joint oil leakage. The double acting high tonnage hollow hydraulic cylinder is mainly used in concrete post tension prestressed, Tension steel strand.

Leadcrete Company produces 250 ton single acting lock nut hydraulic jacks for sale for pile foundation testing. It has the characteristics of large output force, light weight and long-distance operation. It is equipped with high-pressure electric oil pump station of the factory, which can realize various forms of operation such as top, push, pull and squeeze. Used in construction, shipbuilding, metallurgy, mining, petrochemical, railway engineering and other industries, such as jacking, stretching, pressing and other operations. In recent years, 250 ton single acting lock nut hydraulic jacks for sale has been widely used in foundation settlement tests and static piles.

The best price multi strand post tension bridge prestressing hydraulic prestress machine jack is easy to use, but special attention should be paid to the hydraulic cylinder during use. If the best price multi strand post tension bridge prestressing hydraulic prestress machine jack fails and needs to be repaired or replaced before it can continue to be used, it will greatly reduce work efficiency and increase costs.

The carrying capacity of the 200 ton double acting hollow hydraulic jack should be greater than 1.2 times the gravity of the weight; the minimum height of the 200 ton double acting hollow hydraulic jack is suitable. For the convenience of taking out, the minimum height of the hydraulic jack should be adapted to the clearance at the bottom of the weight. When the bolster supports the heavy objects during the landing, the lifting height of the 200 ton double acting hollow hydraulic jack is greater than the sum of the ties and the occipital deformation.

Our flange hydraulic cylinders own have the follow advantages, it is accepted by many different customers. Flange hydraulic cylinders is suitable for high-tonnage lifting operations, and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, its hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

In the word, the YDC series post tension electric stressing mono tension jack’ performance is improved, and widely used in pre-stressing and post stressing construction. If you are interested in post tension electric stressing mono tension jack prices, pls contact us freely.

Our Lead equipment entered the hydraulic tool industry earlier, specializing in scientific research and development, production, and operation of double acting 750 Ton hydraulic cylinder/jack/ram, electric pump for 30 years. Double acting 750 Ton hydraulic cylinder/jack/ram are widely used in roads, railways, bridges, city interchanges, hydropower station dams, rock and soil anchorage, high-rise buildings, slope reinforcement, tunnel and, our products have been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on.

Factory price hydraulic tensioning prestressed jack is our YDC6500 post tension hollow hydraulic jack, it is customized our customer from US. Tonnage is 650 tons, stroke is 200mm, closed height is 410mm, outer diameter is 557mm. Factory price hydraulic tensioning prestressed jack is more convenient, light and new design jack. It has compact structure, perfect seal performance, light weight, small dimension and many other features. The factory price hydraulic tensioning prestressed jack is used for stressing 27 pc strands, and it need to equip a 60Mpa 4L/min electric oil pump.