Peristaltic Pump Used For Treating Waste Water With Low Price

Factory price peristaltic pump head with hopper is known as hose pump and squeeze pump, because of it owning much more advantages than other pumps, such as high self-priming, no seals and valves, dry-running without damage, only tube to replace etc, peristaltic pump application is very wide, for example, construction, pharmacy, textile mill, dye making, water treatment, mining, ceramic, brewery, beverage and TBM project.

Adjustable Industrial Peristaltic Pump For Concrete is used for pumping sludge materials, no contact between product and mechanical parts, only squeezes hose to replace. It could be widely used in many project, such as architecture, underground construction, petrochemical industry, metallurgy, food industry, ceramic, mining, water treatment, hydrocarbon sludge pumping etc.

High Abrasion Hose Peristaltic Pump For Pumping Concrete are mainly applied in distant conveying, grouting and dosing of viscous slurries in construction, mining, food, paper-making, ceramic, etc. We customize hose pumps for different customers.

Industrial Hose Squeeze Pump for Waste Water Applicable Scenarios:
In wastewater treatment, industrial hose squeeze pumps are often used in the following scenarios:
Wastewater transmission: used to transfer wastewater from one place to another, especially when a large amount of wastewater needs to be treated, the pump can provide stable and continuous fluid transmission.
Sludge treatment: Sludge is often produced during wastewater treatment. Industrial hose squeeze pumps can treat sludge containing solid particles and transport it to designated treatment equipment.
Chemical dosing: In the process of wastewater treatment, chemicals are sometimes needed to change the properties of wastewater or remove pollutants. Industrial hose squeeze pumps can accurately control the amount of chemicals added to ensure the effect of wastewater treatment.

Industrial Hose Squeeze Pump for Waste WaterMain features
No pollution: The fluid only contacts the hose, not the pump body, avoiding the contamination of the pump body to the fluid.
High precision: It can accurately control the flow and pressure of the fluid to meet the precise control requirements in the wastewater treatment process.
Low shear force: The shear force on the fluid is small, suitable for conveying shear-sensitive or highly corrosive fluids.
Good sealing: As the only sealing part, the hose can provide a good sealing effect to prevent fluid leakage.
Easy maintenance: The hose is the only vulnerable part of the pump, which is easy to replace and has low maintenance cost.

Peristaltic Pump for Pumping Foam Concrete needs to be specially designed to ensure that it can efficiently and reliably handle this special material containing a large amount of air and lightweight aggregate. Foam concrete is becoming increasingly popular in modern construction due to its low density, good thermal insulation performance and ease of construction.
Peristaltic pumps are very suitable for pumping foam concrete due to their advantages such as pulsation-free conveying, easy maintenance and ability to handle fluids containing solid particles.

The peristaltic pump is the most suitable pump for pumping sulfuric acid. The most important consideration for pumping sulfuric acid is to protect the safety of surrounding workers by preventing the direct exposure of the fluid or the evaporation of the fluid. The unique structure of the peristaltic pump can perfectly avoid this risk.

Low Price Dosing Squeeze Hose Pump For Pumping Mortar is known as hose pump and squeeze pump, because of it owning much more advantages than other pumps, such as high self-priming, no seals and valves, dry-running without damage, only tube to replace, etc.

This type slurry transfer peristaltic hose pump was specially designed for the pumping oil sludge and slurries. Because oil sludge and slurries includes Oil, water, organic clay and oil soluble chemical treatment agent in it. With high temperature and high viscosity, very hard to pumping. We according to this features, Afresh design the structure and choose NBR hose for the peristaltic hose pump. After applied,  workers are very satisfied with our peristaltic hose pump.

Industrial squeeze hose pump with so many features, so it was widely used for pumping concrete, masonry block filling, wall grouting, hoisting mortar for masonry wall construction; concrete sidewalk and patio slab pumping, pumping foam concrete, lightweight foam concrete, mortar and refractory materials etc.

Competitive Price Peristaltic Pump For Pumping Foam Concrete is also name as peristaltic pump, which consists mainly of pump house, rotor, roller, idle roller, squeezes tube and driving unit. The squeeze hose is U-shape in pump house, when rotor drives rollers to rotate, hose is deformed. After the roller rotate, the deformed hose recover by its elasticity. Thus the negative pressure in this hose is generated, sucking slurry, and discharging through outlet under roller’s push, finally forms pressure conveying of slurry.

Short Down Time Small Dosing Peristaltic Pump For Pumping Mortar is known as hose pump and squeeze pump, because of it owning much more advantages than other pumps, such as high self-priming, no seals and valves, dry-running without damage, only tube to replace etc.

Peristaltic Pump Used For Pumping Indium Slurry is known as hose pump and squeeze pump, because of it owning much more advantages than other pumps, such as high self-priming, no seals and valves, dry-running without damage, only tube to replace etc, peristaltic pump application is very wide, for example, construction, pharmacy, textile mill, dye making, water treatment, mining, ceramic, brewery, beverage and TBM project.

Cement Mortar Slurry Peristaltic Hose Pump is a new, multi-functional, multi-purpose industrial pump. It can be used in chemical, petroleum, water treatment, medicine, food, metallurgy, mining, construction, building materials, ceramics, paper-making and other industries.

As hose pump manufacturer in Turkey, we have thousands of hose pumps are in the continuous working. The max. working pressure is arrived to 30Bar, max. flow arrived to 50m3/h, our hose pumps have arrived in many most difficult applications, and save time and cost.

As hose type concrete pump supplier, we have developed full series of hose type concrete pump, output from 15m3/h to 45m3/h, working pressure is from 2.5MPa to 3MPa. Electric motor, diesel engine and hydraulic motor are available options for customization.

High Pressure Hose Squeeze Pump is also name as peristaltic pump, which mainly consists of pump house, rotor, roller, idle roller, squeezes tube and driving unit. The squeeze hose is U-shape in pump house, when rotor drives rollers to rotate, hose is deformed. After the roller rotate, the deformed hose recover by its elasticity. Thus the negative pressure in this hose is generated, sucking slurry, and discharging through outlet under roller’s push, finally forms pressure conveying of slurry.

High abrasion resistance hose pump for clc foam concrete is a completely different principle from traditional pumps and has a wide range of applications. High abrasion resistance hose pump for clc foam concrete also can be used in chemical, petroleum, water treatment, medicine, food, metallurgy, mining, construction, building materials, ceramics, papermaking and other industries.

Flow Rate Can Be Adjusted Industrial Peristaltic Pump With Rubber Hose mainly consists of pump house, rotor, roller, idle roller, squeezes tube and driving unit. The squeeze hose is U-shape in pump house, when rotor drives rollers to rotate, hose is deformed. After the roller rotate, the deformed hose recover by its elasticity. Thus the negative pressure in this hose is generated, sucking slurry, and discharging through outlet under roller’s push, finally forms pressure conveying of slurry.

Squeeze pump hose is also called rubber squeeze tube, squeeze tube, and surround squeeze tube.25 bar wp squeeze pump hose operating principle is:
The rubber hose is flattened by the shaft wheel of the pump and then loosened, so that the rubber hose returns to its original shape by its own elasticity, so that a vacuum is generated in the pipe to suck the mortar in the storage tank, and then the mortar is pushed forward under the extrusion of the shaft wheel.

Leadcrete is a leading industrial peristaltic hose pumps manufacturer in China, as well as a unique manufacturer with ISO 9001:2008, SGS and CE certificate in China.

Peristaltic hose pump can be used for pumping oily slurry, heavy fuel oil sludge, and can be used as a sludge pumps & high pressure slurry transfer pumps.

We have developed full series of hose type concrete pump for sale, output from 15m3/h to 45m3/h, working pressure is from 2.5MPa to 3MPa. Electric motor, diesel engine and hydraulic motor are available options for customization.

High Abrasion Resistance Hose Pump For Clc Foam Concrete is used for pumping sludge materials, no contact between product and mechanical parts, only squeese hose to replace. High Abrasion Resistance Hose Pump For Clc Foam Concrete could be widely used in many project, such as architecture, underground construction, petrochemical industry, metallurgy, food industry, ceramic, mining, water treatment, hydrocarbon sludge pumping etc.

Squeeze hose pipe, also known as peristaltic pump tubing, is a type of hose used in peristaltic pumps. They are usually made of materials such as silicone rubber, natural rubber or thermoplastic elastomers and are used in a variety of different pumping applications.

A pump hose is a hose used to move fluids in industrial and commercial pumping applications. Pump hoses are available in a variety of materials and sizes to suit different applications and pump types. One common type of pump hose is the peristaltic pump hose.

Peristaltic pumps play an important role in wastewater treatment operations. For many years, peristaltic pumps have been used to treat impure, particle-containing water, and various abrasive, corrosive and toxic chemicals used to clean water.

Peristaltic pump for hydrocarbon sludge pumping is mainly used for pump materials through two roller or pressure shoe rotating clockwise squeezing hose. Thus the negative pressure in this hose is generated, sucking slurries, and discharging through outlet under rollers’ push, finally forms pressure conveying of slurries.

Hose pump is also name as concrete hose squeeze peristaltic pump, which consists mainly of pump house, rotor, roller, idle roller, squeezes tube and driving unit. The squeeze hose is U-shape in pump house, when rotor drives rollers to rotate, hose is deformed. After the roller rotate, the deformed hose recover by its elasticity. Thus the negative pressure in this hose is generated, sucking slurry, and discharging through outlet under roller’s push, finally forms pressure conveying of slurry.

Variable speed rotary peristaltic pump for kuwait is also name as peristaltic pump, which consists mainly of pump house, rotor, roller, idle roller, squeezes tube and driving unit. The squeeze hose is U-shape in pump house, when rotor drives rollers to rotate, hose is deformed. After the roller rotate, the deformed hose recover by its elasticity. Thus the negative pressure in this hose is generated, sucking slurry, and discharging through outlet under roller’s push, finally forms pressure conveying of slurry.

We have developed full series of industrial peristaltic hose squeeze pumps for sale with tens of model, work pressure from 0.6-3Mpa, output from 0.01-50m3/h. We also have a ability to design different specification form industrial peristaltic hose squeeze pumps according to the requirement of the customer.