Hot sell industrial peristaltic pump

Squeeze concrete pump hose, also known as squeeze hose, peristaltic pump hose, or tubing, is a type of soft hose that is commonly used in the construction industry for pumping concrete, mortar, and other high-viscosity liquids. It is made up of an elastomeric tube that is squeezed by a set of rotating rollers or fingers attached to a rotor or a cam. This squeezing action moves the liquid through the hose and releases it at the other end.

We are peristaltic hose pump manufacturer, our peristaltic hose pump has much more advantage technical feature than other pump, such as:
★ Only squeeze hose is wearing part, it also is the only part in contact with the pumped product.
★ Self-priming is automatic on start-up and does not require any special equipment. A flooded suction is required for viscous products only.

High Abrasion Resistance Hose Pump For Clc Foam Concrete is used for pumping sludge materials, no contact between product and mechanical parts, only squeese hose to replace. High Abrasion Resistance Hose Pump For Clc Foam Concrete could be widely used in many project, such as architecture, underground construction, petrochemical industry, metallurgy, food industry, ceramic, mining, water treatment, hydrocarbon sludge pumping etc.

Squeeze hose for foam concrete pump is a tube specially made for foam concrete pump, which satisfies abundant shape recovery and wear resistance. Squeeze hose is mainly divided into a high-elastic and wear-resistant outer layer, an anti-compression interlaced middle layer and a strong and lubricating inner layer. The material is excellent, the processing is fine, and the process is special. Different materials can be adjusted to manufacture pipes for different applications.
Hose for foam concrete pump features:
1. Uniform toughness makes the force more uniform;
2. Special anti-aging formula;
3. Strong shape recovery makes the suction stronger;
4. Internal pressure resistance up to 3MPa;
5. The fine processing size extends the service time;
6. Uniquely suitable for pumping viscous fibers and particles.

High Performance Hose Pump For Oil Base Mud usually consists mainly of pump hose, rotor, roller, idle rollers, squeeze hose and driving unit etc. The squeeze hose is U-shape in pump house, when rotor drives roller to rotate, hose is deformed. After the roller rotate, the deformed hose recover by its elasticity. Thus the negative pressure is this hose is generated, sucking slurries, and discharging through outlet under roller’s push, finally forms pressure conveying of slurries.

Nature Chemically Resistant Rubber Peristaltic Hose Pump For Transferring Slurry is used for pumping sludge materials, no contact between the product and mechanical parts only squeezes hose to replace.

Squeeze hose for concrete pump application:
The extruded tubes for extruded pumps produced by our company are widely used in pump body accessories for construction, highways, tunnels, bridges, water conservancies, mines, lines, and other construction projects.

Trelleborg squeese hose has the characteristics of long service life and a wide application range. Its structure is a high-strength synthetic fiber braid layer reinforced by one or more layers. The inner and outer linings of the Trelleborg squeese hose are extruded. The inner lining is made of a series of compound rubber.

Oem Supplier Industrial Hose Pump For Oilbase Mud is used for pumping sludge materials, no contact between product and mechanical parts, only squeezes hose to replace.

Portable hose pump for pumping foam concrete is a new, multi-functional, multi-purpose industrial pump. It can be used in chemical, petroleum, water treatment, medicine, food, metallurgy, mining, construction, building materials, ceramics, paper-making and other industries.

China Factory Direct Sale Industrial Hose Peristaltic Pump application is very wide, for example, construction, pharmacy, textile mill, dye making, water treatment, mining, ceramic, brewery, beverage and TBM project.

Dye Making Used Peristaltic Metering Pump could be widely used in many project, such as architecture, underground construction, petrochemical industry, metallurgy, food industry, ceramic, mining, water treatment, hydrocarbon sludge pumping etc.

Easy operate peristaltic pump for pumping mortar is also name as peristaltic pump, which consists mainly of pump house, rotor, roller, idle roller, squeezes tube and driving unit. The squeeze hose is U-shape in pump house, when rotor drives rollers to rotate, hose is deformed. After the roller rotate, the deformed hose recover by its elasticity. Thus the negative pressure in this hose is generated, sucking slurry, and discharging through outlet under roller’s push, finally forms pressure conveying of slurry.

Hose type concrete pump for concrete grouting with so many features, so it was widely used for masonry block filling, wall grouting, hoisting mortar for masonry wall construction; concrete sidewalk and patio slab pumping, pumping foam concrete, lightweight foam concrete, mortar and refractory materials etc.

Ce Iso Durable Industrial Hose Squeeze Pumps With Adjustable Flow Rate is used for pumping sludge materials, no contact between product and mechanical parts, only squeezes hose to replace. Ce Iso Durable Industrial Hose Squeeze Pumps could be widely used in many project, such as architecture, underground construction, petrochemical industry, metallurgy, food industry, ceramic, mining, water treatment, hydrocarbon sludge pumping etc.

As a peristaltic pump manufacturer, we have wholesale peristaltic pump for slurry transfer which is high quality and having a competitive price and get much better feedback from customers. The peristaltic pump is ideal for pumping slurry and adopts frequency converter to adjust the motor speed and control the flow rate.

The working principle of the Squeeze hose peristaltic pump is based on the alternate expansion and contraction of the elastic squeeze hose to transport substances, and its operation is as simple as our throat and esophagus. The squeeze hose with smooth inner wall and reliable strength is installed inside the pump body, and is rotated and squeezed by two protrusions on the turntable. This kind of rotation makes the medium transport in one direction without backflow, which can make the pump applied to the occasion of precise metering, and the pressure can reach 16Bar / 230psi. The shape recovery of the squeeze hose after conveying the medium can generate a full vacuum in the pipe to suck the medium into the pipe, so the use of the squeeze hose peristaltic pump can convey extremely viscous media without problems. Fill the lower part of the pump body with a specially designed lubricating oil grade to lubricate the squeeze hose and reduce the temperature so that the squeeze hose has a longer service life. Since the medium only contacts the squeeze hose for peristaltic pump and does not contact any other parts, the squeeze hose peristaltic pump is very suitable for conveying abrasive and high-viscosity media.

Multifunction hose type concrete spraying pump with hopper from China suppliers is a new, multi-purpose industrial pump. It can be used in chemical, petroleum, water treatment, medicine, food, metallurgy, mining, construction, building materials, ceramics, paper-making and other industries.

Short Down Time Only Squeeze Hose To Replace Peristaltic Pumps Installations Type With Trade Assurance could be widely used in many project, such as architecture, underground construction, petrochemical industry, metallurgy, food industry, ceramic, mining, water treatment, hydrocarbon sludge pumping etc.

Squeeze hose pump is very ideal for pumping foam concrete, it will not damage foam concrete feature. Compared with other kind pump, squeeze hose pump no seals, no valve, dry-running without damage, reversible and only squeeze hose is the only replace part.

Hose Type Factory Price Peristaltic Pump For Pumping Foam Lightweight Concrete is known as hose pump and squeeze pump, because of it owning much more advantages than other pumps, such as high self-priming, no seals and valves, dry-running without damage, only tube to replace etc, peristaltic pump application is very wide, for example, construction, pharmacy, textile mill, dye making, water treatment, mining, ceramic, brewery, beverage and TBM project.

Easy Maintenance Squeeze Industrial Peristaltic Pump For Vietnam could be widely used in many project, such as architecture, underground construction, petrochemical industry, metallurgy, food industry, ceramic, mining, water treatment, hydrocarbon sludge pumping etc.

China factory concrete industrial peristaltic hose pump was widely used for masonry block filling, wall grouting, hoisting mortar for masonry wall construction; concrete sidewalk and patio slab pumping, pumping foam concrete, lightweight foam concrete, mortar and refractory materials etc.

The Hose Squeeze Peristaltic Industrial Hose Pump is a new type of multifunctional industrial pump that was developed by absorbing sophisticated technology from abroad. The Hose Squeeze Peristaltic Industrial Hose Pump eliminates the standard pump impeller and shaft seal, providing significant benefits in moving media with high viscosity, corrosion, and substantial fluid contaminants.

Squeeze hose pipe consists primarily of an inner rubber layer, middle rubber layer, 2, 4, or 6 layers of steel wire reinforcement, and an outer rubber layer. The inner rubber layer has the function of maintaining the conveyed medium under pressure and protecting the steel wire from corrosion. The outer layer protects the steel wire from damage, while the layer(s) of steel wire (φ0.3-2.0 reinforcing wire) serves as the strengthening effect of the skeleton material.

High Quality Hose Pump To Pump Sewage In Dubai could be widely used in many project, such as architecture, underground construction, petrochemical industry, metallurgy, food industry, ceramic, mining, water treatment, hydrocarbon sludge pumping etc.

Nylon Reinforcement Layer Chemically Resistant Peristaltic Rubber Hose Pump Manufacturers are mainly applied in distant conveying, grouting and dosing of viscous slurries in construction, mining, food, paper-making, ceramic, etc. We customize hose pumps for different customers.

Peristaltic pumps consists mainly of pump house, rotor, roller, idle roller, squeeze hose and driving unit. The squeeze hose is U-shape in pump house, when rotor drives roller to rotate, hose is deformed. After the roller rotate, the deformed hose recover by its elasticity. Thus th e negative pressure in this hose is generated, sucking slurries, and discharging through outlet under roller’s push, finally forms pressure conveying of slurries.

For TBM project, the industrial high pressure hose pump for bentonite grout can be used for pumping bentonite and mud fluid. Because the tube is only spare part, easy to maintain, and saving cost, the industrial high pressure hose pump for bentonite grout get better feedback from customers.

LCP20H-H hose type concrete pump for wall grouting comply with national and international standards. LCP20H-H hose type concrete pump for wall grouting price concessions, stable performance, good sealing performance, easy operation, no water cooling, beautiful and durable.