Peristaltic pump for pumping hydrocarbon sludge

The Hose Squeeze Peristaltic Industrial Hose Pump is a new type of multifunctional industrial pump that was developed by absorbing sophisticated technology from abroad. The Hose Squeeze Peristaltic Industrial Hose Pump eliminates the standard pump impeller and shaft seal, providing significant benefits in moving media with high viscosity, corrosion, and substantial fluid contaminants.

Widely Used High Efficiency Concrete Peristaltic Industrial Hose Pump is known as hose pump and squeeze pump, because of it owning much more advantages than other pumps, such as high self-priming, no seals and valves, dry-running without damage, only tube to replace etc.

Hydraulic motor driven squeeze type concrete pump was build based on hose pump, the hydraulic motor driven squeeze type concrete pump uses high pressure, resisting wear squeeze hose with steel wire reinforcement layers, the working pressure is up to 25 bars.

High volume hose squeeze pumps for high viscosity fluids is used for pumping sludge materials, no contact between product and mechanical parts, only squeezes hose to replace.

Peristaltic dosing pump popular used in Malaysia factory is a kind of peristaltic pump. An elastomeric tube is squeezed along a length by rollers. The tube’s restitution after squeezing produces a vacuum that draws fluid continuously into the tube. That doesn’t cause any damage to the product. And contaminations are avoided.

High-pressure steel wire hoses for transferring slurry are mainly used in hydraulic supports, oil field drilling, and mines, and are suitable for engineering construction, lifting, transportation, metallurgical forging, mining equipment, ships, injection molding machinery, agricultural machinery, various machine tools and mechanization and automation of various industrial sectors. The hydraulic system has a certain pressure (high pressure) and oil (such as mineral oil, soluble oil, hydraulic oil, fuel oil, lubricating oil) and water-based liquid (such as emulsion, oil-water emulsion, water) and hydraulic transmission, etc. The highest working pressure can reach 70-100 MPa.

Squeeze concrete pump hose, also known as squeeze hose, peristaltic pump hose, or tubing, is a type of soft hose that is commonly used in the construction industry for pumping concrete, mortar, and other high-viscosity liquids. It is made up of an elastomeric tube that is squeezed by a set of rotating rollers or fingers attached to a rotor or a cam. This squeezing action moves the liquid through the hose and releases it at the other end.

Hose Peristaltic Pump Used In Oil Drilling Project

Flow Rate Can Be Adjusted Peristaltic Pump With Trade Assurance is known as hose pump and squeeze pump, because of it owning much more advantages than other pumps, such as high self-priming, no seals and valves, dry-running without damage, only tube to replace etc, peristaltic pump application is very wide, for example, construction, pharmacy, textile mill, dye making, water treatment, mining, ceramic, brewery, beverage and TBM project.

Industrial Squeeze Hose Peristaltic Pump For Concrete is a new, multi-functional, multi-purpose industrial pump. It can be used in chemical, petroleum, water treatment, medicine, food, metallurgy, mining, construction, building materials, ceramics, papermaking and other industries.

High Volume Hose Squeeze Pumps For High Viscosity Fluids are mainly applied in distant conveying, grouting and dosing of viscous slurries in construction, mining, food, paper-making, ceramic, etc. We customize hose pumps for different customers.

Variable speed rotary peristaltic pump for kuwait is also name as peristaltic pump, which consists mainly of pump house, rotor, roller, idle roller, squeezes tube and driving unit. The squeeze hose is U-shape in pump house, when rotor drives rollers to rotate, hose is deformed. After the roller rotate, the deformed hose recover by its elasticity. Thus the negative pressure in this hose is generated, sucking slurry, and discharging through outlet under roller’s push, finally forms pressure conveying of slurry.

Long service life concrete peristaltic pump is absorbing the foreign advanced technology and the development of a new, multifunction and multipurpose industrial pump.

Squeeze hose manufacturers provide peristaltic pump squeeze hose product structure, peristaltic pump squeeze hose application fields, and peristaltic pump squeeze hose use precautions and other related information.
The product structure of the squeeze hose: the inner rubber is natural high wear-resistant rubber, the middle is high elastic nylon thread, and the outer layer is high wear-resistant and anti-aging rubber.

Heavy-duty abrasion resistance industry hose pump is used for pumping sludge materials, no contact between product and mechanical parts, only squeezes hose to replace.

Cheap Peristaltic Pump Used For Pumping Mortar is known as hose pump and squeeze pump, because of it owning much more advantages than other pumps, such as high self-priming, no seals and valves, dry-running without damage, only tube to replace etc, peristaltic pump application is very wide, for example, construction, pharmacy, textile mill, dye making, water treatment, mining, ceramic, brewery, beverage and TBM project.

China Factory Direct Sale Industrial Hose Peristaltic Pump application is very wide, for example, construction, pharmacy, textile mill, dye making, water treatment, mining, ceramic, brewery, beverage and TBM project.

Industrial squeeze hose pump with so many features, so it was widely used for pumping concrete, masonry block filling, wall grouting, hoisting mortar for masonry wall construction; concrete sidewalk and patio slab pumping, pumping foam concrete, lightweight foam concrete, mortar and refractory materials etc.

Hose Type Concrete Pump For Pumping Concrete From China is used for pumping sludge materials, no contact between product and mechanical parts, only squeese hose to replace. Hose Type Concrete Pump For Pumping Concrete From China could be widely used in many project, such as architecture, underground construction, petrochemical industry, metallurgy, food industry, ceramic, mining, water treatment, hydrocarbon sludge pumping etc.

We are good quality peristaltic pump manufacturer, our good quality peristaltic pumps can be used in following area: construction, ceramic, pharmacy, mining, textile mill, dye making, brewery, paper making, water treatment, and beverage, underground engineering, etc.

No seals food industrial peristaltic pump for pumping refractory materials could be widely used in many project, such as architecture, underground construction, petrochemical industry, metallurgy, food industry, ceramic, mining, water treatment, hydrocarbon sludge pumping etc.

For TBM project, the peristaltic pump can be used for pumping bentonite and mud fluid. Because the tube is only spare part, easy to maintain, and saving cost, the peristaltic pump for grouting bentonite get better feedback from customers.

peristaltic hoses can be used in a wide range of sizes and can be customized according to your needs. It is used in hose pumps to pump water, mortar, cement, concrete, bentonite, foamed concrete, pigment, sewage, etc

The squeeze pump hose for the extruding pump produced by our company is widely used in the pump body accessories for the construction of highways, tunnels, bridges, water conservancy, mine lines, and other construction projects, and also can be used for spraying large areas of wall bottom layer and various types of the cover layer, after the pressure grouting, mortar transport foundation construction pressure grouting, in the GRC industry to make glass fiber reinforced cement products to make large and medium-sized precast concrete components in the petrochemical metallurgy industry used in blast furnace inner wall spray perfect fire material.

Industrial rubber peristaltic pump are mainly applied in distant conveying, grouting and dosing of viscous slurries in construction, mining, food, paper-making, ceramic, etc. We customize hose pumps for different customers.

Compared with other type pump, hose pump have much outstanding features, such as: no seals, no valve, dry -running without damage, reversible, only squeeze hose to replace, easy to operate and maintain.

Ce safety standard squeeze-type industrial are mainly applied in distant conveying, grouting and dosing of viscous slurries in construction, mining, food, paper-making, ceramic, etc. We customize hose pumps for different customers.

Peristaltic pump for hydrocarbon sludge pumping is mainly used for pump materials through two roller or pressure shoe rotating clockwise squeezing hose. Thus the negative pressure in this hose is generated, sucking slurries, and discharging through outlet under rollers’ push, finally forms pressure conveying of slurries.

High abrasion rubber hose peristaltic pump for concrete pumping could be widely used in many project, such as architecture, underground construction, petrochemical industry, metallurgy, food industry, ceramic, mining, water treatment, hydrocarbon sludge pumping etc.

We are durable industrial concrete peristaltic pumps manufacturer specialized in R & D, manufacture and sale. We have developed full series of durable industrial concrete peristaltic pumps for sale now, working pressure from 0.6-3 Mpa, output from 0.01-50 m3/h.NR, NBR and EPDM squeeze hoses are available for customization.