Hot sell long stroke synchronous jack suppliers

600 ton double acting high tonnage hollow hydraulic jack combines all the design features of single-acting and the superiority of double-acting design, thereby improving the operation and use speed, especially in the relatively long stroke operation. The 600 ton double acting high tonnage hollow hydraulic jack has a through hole in the piston center, which is widely used in nuclear power plants, tunnel engineering, underground engineering, construction and other occasions to realize the pre-tightening process, and can also be used in other similar needs.

The characteristics 650-ton double acting hydraulic jack with pump: The piston part is welded with copper, the piston rod is coated with hard chrome, never pulls the cylinder, and the wear resistance is strong. High-temperature baking varnish, surface abrasion resistance, corrosion resistance, and impact. Double-acting design, spring retraction (reset). High-strength alloy steel is durable.

The prestressing concrete jack prestressed equipment manufacture in China is mainly used for the overall pulling force of the group anchor. The jack is easy to operate, reliable and saves steel strands than other types of jacks. Prestressing concrete jack prestressed equipment is mainly used for bridge construction and other projects that use products such as anchor bolts and tensile equipment.

The post tension jack for post tensioning tension equipment are used pre-stress steel wire and bridge pulling. The post tension jack for post tensioning tension equipment need match oil pump use, the power of the tension and the lift is provided by the high pressure oil at the tension pump.

250 ton double acting hydraulic jack cylinder for lifting and electric pump must be on a sturdy surface so that it can withstand the load, the load must be placed in the center, covering all pistons, can only load stationary object. If the hydraulic oil pump is damaged, deformed, or in need of repair, do not use! When the 250 ton double acting hydraulic jack cylinder for lifting reciprocating action must be extended without hindrance, to ensure complete phase contact, only when all the piston is fully retracted in order to pump the fuel.

Double acting hydraulic jack is suitable for high-tonnage lifting operations, and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, its hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

Highly cost effective double acting high tonnage hydraulic cylinder jack for sale can be used for the maintenance of large machinery, the overall lifting of the bridge, the maintenance of the hydropower plant gate, the lifting of the steel structure and the installation of supporting equipment. So what are the precautions for the use of highly cost effective double acting high tonnage hydraulic cylinder jack for sale?

First, 500 ton single acting hydraulic ram jack description: The single acting hydraulic jack with pump has a large stroke and a strong lifting capacity, and is the best choice for maintenance, manufacturing, construction and other operations. All models can be processed according to customer requirements, and the bottom is designed with mounting holes, which makes the installation and positioning convenient.
Second, the characteristics 500 ton single acting hydraulic ram jack: The piston part is welded with copper, the piston rod is coated with hard chrome, never pulls the cylinder, and the wear resistance is strong. High temperature baking varnish, surface abrasion resistance, corrosion resistance and impact. Single-acting design, spring retraction (reset). High strength alloy steel is durable.

The carrying capacity of the 260 Ton single acting low profile lock nut hydraulic cylinder jack should be greater than 1.2 times the gravity of the weight; the minimum height of the hydraulic jack is suitable. For the convenience of taking out, the minimum height of the 260 Ton single acting low profile lock nut hydraulic cylinder jack should be adapted to the clearance at the bottom of the weight. When the bolster supports the heavy objects during the landing, the lifting height of the hydraulic jack is greater than the sum of the ties and the occipital deformation.

QYC single strand mono stressing jack, after proving its structure, it is more convenient, light and new design jack. QYC single strand mono stressing jack has compact structure, perfect seal performance, light weight, small dimension and many other features. QYC single strand mono stressing jack is widely used for front tension and post tension prestressing PC strands, and if it is equipped work anchor and wedges, it also could be used for tensioning prestressing multi-strands anchor and wedges.

Double acting high tonnage flange hydraulic cylinder can be used for the maintenance of large machinery, the overall lifting of the bridge, the maintenance of the hydropower plant gate, the lifting of the steel structure and the installation of supporting equipment. If you want to know more double acting high tonnage flange hydraulic cylinder information, please contact us!

Gaodetec is a professional high pressure 700 bar single acting super low height hydraulic lifting jack supplier in the design, production, sale and service of hydraulic jack. If you want to know more high pressure 700 bar single acting super low height hydraulic lifting jack price, please contact us!

Hydraulic jack cylinder can be equipped with a two-way manual oil pump or a two-way electric oil pump. Because of the through hole in the middle, the hollow jack not only has the lifting capacity of a general hydraulic jack, but also has the stretching and tensioning functions that the ordinary jack does not have. The through hole allows cables, steel ropes and other shafts to pass through. The hollow roof has double functions and hydraulic retraction. Hydraulic jack cylinder is the first choice for various large-scale projects. It has the characteristics of convenient operation and control. The new technology and structure make the hollow roof Jacks are safer and last longer.

600 ton hollow hydraulic oil cylinder can be used for the maintenance of large machinery, the overall lifting of the bridge, the maintenance of the hydropower plant gate, the lifting of the steel structure and the installation of supporting equipment. If you want to know more 600 ton hollow hydraulic oil cylinder information, please contact us!

First, 350ton spring return single acting hydraulic cylinder description: The single acting hydraulic jack with pump has a large stroke and a strong lifting capacity, and is the best choice for maintenance, manufacturing, construction and other operations. All models can be processed according to customer requirements, and the bottom is designed with mounting holes, which makes the installation and positioning convenient.
Second, the characteristics 350ton spring return single acting hydraulic cylinder with pump: The piston part is welded with copper, the piston rod is coated with hard chrome, never pulls the cylinder, and the wear resistance is strong. High temperature baking varnish, surface abrasion resistance, corrosion resistance and impact. Single-acting design, spring retraction (reset). High strength alloy steel is durable.

If multiple 200 ton double acting hydraulic hollow ram are used to lift the same equipment, the same type of 200 ton double acting hydraulic hollow ram should be used, and the sum of the additional lifting weight of each 200 ton double acting hydraulic hollow ram should not be less than 1.5 times the gravity of the equipment. Hydraulic jacks should be wiped clean before use and should check whether the components can be active, whether there is any damage, avoid loading the quick joints when there is load, to prevent the occurrence of faults and damaged parts.

Leadcrete is a professional high pressure 10000psi single acting hydraulic jack for pulling supplier in the design, production, sale and service of hydraulic jack.

Leadcrete brand 500tons stroke 150mm double acting hydraulic jack and electric oil pump own have the following features, promise quality.
500tons stroke 150mm double acting hydraulic jack, hydraulic piston return; piston rod plating 40Cr metal layer Increase surface brightness and hardness Prevent air corrosion; the piston and the guide ring are made of copper, which is more wear resistant. The special guide ring design can withstand an eccentric load of up to 5% of the rated load capacity of the jack. It is equipped with a dust-proof ring to prevent dust from entering the cylinder. All models include quick connectors and dust caps. Up to 13 seals inside the cylinder to ensure sealing performance and extend service life.

High quality 1000 ton double acting 700bar hydraulic cylinder, hydraulic piston return; piston rod plating 40Cr metal layer Increase surface brightness and hardness Prevent air corrosion; the piston and the guide ring are made of copper, which is more wear resistant. High quality 1000 ton double acting 700bar hydraulic cylinder special guide ring design can withstand an eccentric load of up to 5% of the rated load capacity of the jack.

New or long-term single-acting hollow hydraulic jacks, because there is more air in the cylinder, when the piston is used, the piston rod may show a slight jump phenomenon. The single acting hollow hydraulic jacks can be reciprocated 2-3 times without load to eliminate The air inside the cavity. Long-term idle jacks, because the seals do not work for a long time, causing the seals to harden, thus affecting the service life of the hydraulic jacks. Therefore, when the hydraulic jacks are not in use, the hydraulic jacks should be reciprocated 2-3 times per month.

Double acting hollow plunger lifting hydraulic jack can be equipped with a two-way manual oil pump or a two-way electric oil pump. Because of the through hole in the middle, the hollow jack not only has the lifting capacity of a general hydraulic jack, but also has the stretching and tensioning functions that the ordinary jack does not have. The through hole allows cables, steel ropes and other shafts to pass through. The hollow roof has double functions and hydraulic retraction. The double acting hollow plunger lifting hydraulic jack is the first choice for various large-scale projects. It has the characteristics of convenient operation and control. The new technology and structure make the hollow roof Jacks are safer and last longer.

Our Lead equipment entered the hydraulic tool industry earlier, specializing in scientific research and development, production, and operation of 200t capacity single-acting hydraulic jack, electric pump for 30 years. 20t capacity single-acting hydraulic jacks are widely used in road, railway, bridge, city interchanges, hydropower station dams, rock and soil anchorage, high-rise buildings, slope reinforcement, tunnels and, our products have been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on.

Low profile horizontal hydraulic piston cylinder own have the follow advantages, low profile horizontal hydraulic piston cylinder is accepted by many different customers. Double acting hydraulic jack is suitable for high-tonnage lifting operations, and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, low profile horizontal hydraulic piston cylinder hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

Our Lead equipment entered the hydraulic tool industry earlier, specializing in scientific research and development, production and operation of pull double acting hydraulic cylinder for sale, electric pump for 30 years. Pull double acting hydraulic cylinder for sale are widely used in road, railway, bridge, city interchange, hydropower station dam, rock and soil anchorage, high-rise buildings, slope reinforcement, tunnel and, our products have been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on.

Leadcrete Company produces double-acting steel press hydraulic cylinders with great prices for pile foundation testing. It has the characteristics of large output force, light weight and long-distance operation. Double acting steel press hydraulic cylinder with great price is equipped with a high-pressure electric oil pump station of the factory, which can realize various forms of operation such as top, push, pull and squeeze. Used in construction, shipbuilding, metallurgy, mining, petrochemical, railway engineering and other industries, such as jacking, stretching, pressing and other operations. In recent years, it has been widely used in foundation settlement tests and static piles.

When the 700-ton hydraulic ram is lifting, it is necessary to select a hydraulic jack suitable for tonnage:
The carrying capacity of the 700-ton hydraulic ram should be greater than 1.2 times the gravity of the weight; the minimum height of the hydraulic jack is suitable. For the convenience of taking out, the minimum height of the 700-ton hydraulic ram should be adapted to the clearance at the bottom of the weight. When the bolster supports heavy objects during the landing, the lifting height of the hydraulic jack is greater than the sum of the ties and the occipital deformation.

Leadcrete Company produces hydraulic jacks for pile foundation testing.It has the characteristics of large output force, light weight and long-distance operation. 500 ton double acting hydraulic cylinder for sale is equipped with high-pressure electric oil pump station of the factory, which can realize various forms of operation such as top, push, pull and squeeze. Used in construction, shipbuilding, metallurgy, mining, petrochemical, railway engineering and other industries, such as jacking, stretching, pressing and other operations. In recent years, 500 ton double acting hydraulic cylinder for sale has been widely used in foundation settlement tests and static piles.

As a professional single acting self heavy duty hydraulic jack manufacturer, Leadcrete has produces a variety of series of single acting self heavy duty hydraulic jacks, such as single acting center hole hydraulic jack, thin type single acting hydraulic jack and so on. The single acting self heavy duty hydraulic jack also come in different sizes depending on the stroke, and the capacity of the hydraulic fluid.

High quality standard heavy industry hydraulic cylinder 300 ton can be used for the maintenance of large machinery, the overall lifting of the bridge, the maintenance of the hydropower plant gate, the lifting of the steel structure and the installation of supporting equipment.

Hydraulic cylinder double acting with flange , as industrial maintenance and installation tools that are widely used in the industry, different from the mechanical tools used in our homes, especially in the way they are maintained. If you want to know more hydraulic cylinder double acting with flange information, please contact us!