600 ton double acting hydraulic cylinder used for dump truck parts

Our Lead equipment entered the hydraulic tool industry earlier, specializing in scientific research and development, production, and operation of double acting 750 Ton hydraulic cylinder/jack/ram, electric pump for 30 years. Double acting 750 Ton hydraulic cylinder/jack/ram are widely used in roads, railways, bridges, city interchanges, hydropower station dams, rock and soil anchorage, high-rise buildings, slope reinforcement, tunnel and, our products have been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on.

The attention of 250 ton double acting solid hydraulic ram jack with pump for sale:
a) If there is a blanking phenomenon during working, first loosen the oil drain screw on the pump body, and then open vertically pump body and turn it down a few times, then tighten the oil drain screw to continue using.
b) When there is load, it is forbidden to remove the quick connector to avoid accidents and damage to the machine.
c) This 250 ton double acting solid hydraulic ram jack uses oil as the medium. It is necessary to do the maintenance work of the oil and the machine to avoid fouling or oil leakage and affect the use effect.

When the 700-ton hydraulic ram is lifting, it is necessary to select a hydraulic jack suitable for tonnage:
The carrying capacity of the 700-ton hydraulic ram should be greater than 1.2 times the gravity of the weight; the minimum height of the hydraulic jack is suitable. For the convenience of taking out, the minimum height of the 700-ton hydraulic ram should be adapted to the clearance at the bottom of the weight. When the bolster supports heavy objects during the landing, the lifting height of the hydraulic jack is greater than the sum of the ties and the occipital deformation.

The 600-ton double-acting hollow plunger hydraulic lifting cylinder can be equipped with a two-way manual oil pump or a two-way electric oil pump. Because of the through hole in the middle, the hollow jack not only has the lifting capacity of a general hydraulic jack but also has the stretching and tensioning functions that the ordinary jack does not have. The through hole allows cables, steel ropes, and other shafts to pass through. The hollow roof has double functions and hydraulic retraction. The 600-ton double-acting hollow plunger hydraulic lifting cylinder is the first choice for various large-scale projects. It has the characteristics of convenient operation and control. The new technology and structure make the hollow roof jacks are safer and last longer.

700 bar RCH single acting hollow plunger lift ram piston hydraulic cylinder is suitable for high-tonnage lifting operations, and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, 700 bar RCH single acting hollow plunger lift ram piston hydraulic cylinder hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

Double-acting high tonnage hydraulic cylinder, hydraulic piston return; piston rod plating 40Cr metal layer Increase surface brightness and hardness Prevent air corrosion; the piston and the guide ring are made of copper, which is more wear-resistant. The special guide ring design can withstand an eccentric load of up to 5% of the rated load capacity of the double-acting high-tonnage hydraulic cylinder.

Factory supply double acting prestress equipment jack is compact, the work is smooth, the oil pressure is high, the tension is large. Factory supply double acting prestress equipment jack is widely used in highway bridges, railway bridges, hydroelectric dams, high-rise buildings and other pre-stress construction projects.

Double-acting hollow hydraulic jack is suitable for high-tonnage lifting operations, and requires high-precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, Double acting hollow hydraulic jack hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

Hydraulic cylinder double acting with flange , as industrial maintenance and installation tools that are widely used in the industry, different from the mechanical tools used in our homes, especially in the way they are maintained. If you want to know more hydraulic cylinder double acting with flange information, please contact us!

Leadcrete brand high quality 250 ton double acting hydraulic jack and electric oil pump for sale to Russian. The tonnage of this high quality 250 ton double acting hydraulic jack is 250 tons with 500mm stoke. If you want to know more high quality 250 ton double acting hydraulic jackinformation, please contact us!

Double acting 200 ton hydraulic jack, as industrial maintenance and installation tools that are widely used in the industry, different from the mechanical tools used in our homes, especially in the way they are maintained. If you want to know more double acting 200 ton hydraulic jack information,please contact us!

Leadcrete Company produces 200ton 200mm stroke single acting pancake lock nut hydraulic jack. It has the characteristics of large output force, light weight and long-distance operation. 200ton 200mm stroke single acting pancake lock nut hydraulic jack is equipped with high-pressure electric oil pump station of the factory, which can realize various forms of operation such as top, push, pull and squeeze. Used in construction, shipbuilding, metallurgy, mining, petrochemical, railway engineering and other industries, such as jacking, stretching, pressing and other operations. In recent years, 200ton 200mm stroke single acting pancake lock nut hydraulic jack has been widely used in foundation settlement tests and static piles.

We have many types of double acting piston hydraulic lifting jack for synchronous lifting pushing: thin jacks, single-acting thin jacks, thin hydraulic cylinders are all thin hydraulic jacks–lead company professional planning to build. Different types of double acting piston hydraulic lifting jack for synchronous lifting pushing use methods and operating precautions are not the same, thin hydrualic jacks, hydraulic cylinder more volume Small, with more working ability, especially in the local application with narrow spatial orientation, and has the functions of simple and flexible, strong top force.

Why so many customers to chose Lead double acting two-way jack hydraulic hollow price for sale? The following features solve all of your question.
More accurate
Perfect in workmanship
More beautiful
Anti-rust durable
Quality guarantee
More competitively price
If you want to know more double acting two-way jack hydraulic hollow price for sale,please contact us!

Single acting heavy duty cylinder hydraulic jack for sale is suitable for high-tonnage lifting operations, and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, single acting heavy duty cylinder hydraulic jack for sale hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

150 ton hydraulic cylinder jack can be used for the maintenance of large machinery, the overall lifting of the bridge, the maintenance of the hydropower plant gate, the lifting of the steel structure and the installation of supporting equipment. 150 ton hydraulic cylinder jack.

Our Lead equipment entered the hydraulic tool industry earlier, specializing in scientific research and development, production and operation of 300-ton double hollow jack hydraulic cylinder, electric pump for 30 years. 300 ton double hollow jack hydraulic cylinders are widely used in roads, railway, bridge, city interchange, hydropower station dam, rock and soil anchorage, high-rise buildings, slope reinforcement, tunnel and, our products have been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on.

New or long-term single-acting hollow hydraulic jacks, because there is more air in the cylinder, when the piston is used, the piston rod may show a slight jump phenomenon. The single acting hollow hydraulic jacks can be reciprocated 2-3 times without load to eliminate The air inside the cavity. Long-term idle jacks, because the seals do not work for a long time, causing the seals to harden, thus affecting the service life of the hydraulic jacks. Therefore, when the hydraulic jacks are not in use, the hydraulic jacks should be reciprocated 2-3 times per month.

Hydraulic jack with double acting can be used for the maintenance of large machinery, the overall lifting of the bridge, the maintenance of the hydropower plant gate, the lifting of the steel structure, and the installation of supporting equipment. If you want to know more about hydraulic jacks with double-acting information, please contact us!

If multiple single acting flat hydraulic jack are used to lift the same equipment, the same type of single acting flat hydraulic jack should be used, and the sum of the additional lifting weight of each hydraulic jack should not be less than 1.5 times the gravity of the equipment. Hydraulic jacks should be wiped clean before use, and should check whether the components can be active, whether there is any damage, avoid loading the quick joints when there is load, to prevent the occurrence of faults and damaged parts.

250 ton double acting hydraulic jack cylinder for lifting and electric pump must be on a sturdy surface so that it can withstand the load, the load must be placed in the center, covering all pistons, can only load stationary object. If the hydraulic oil pump is damaged, deformed, or in need of repair, do not use! When the 250 ton double acting hydraulic jack cylinder for lifting reciprocating action must be extended without hindrance, to ensure complete phase contact, only when all the piston is fully retracted in order to pump the fuel.

300 ton double acting electric hydraulic cylinder jack special guide ring design can withstand an eccentric load of up to 5% of the rated load capacity of the jack. 300 ton double acting electric hydraulic cylinder jack is equipped with a dust-proof ring to prevent dust from entering the cylinder. All models include quick connectors and dust caps. Up to 13 seals inside the cylinder to ensure sealing performance and extend service life.

Leadcrete Company produces double-acting hydraulic cylinders for pile foundation testing. It has the characteristics of large output force, lightweight and long-distance operation. Double-acting hydraulic cylinders is equipped with a high-pressure electric oil pump station of the factory, which can realize various forms of operation such as top, push, pull, and squeeze. Used in construction, shipbuilding, metallurgy, mining, petrochemical, railway engineering, and other industries, such as jacking, stretching, pressing, and other operations. In recent years, it has been widely used in foundation settlement tests and static piles.

300-ton double-acting hollow hydraulic jack combines all the design features of single-acting and the superiority of double-acting design, thereby improving the operation and use speed, especially in the relatively long stroke operation. The 300-ton double-acting hollow hydraulic jack has a through a hole in the piston center, which is widely used in nuclear power plants, tunnel engineering, underground engineering, construction and other occasions to realize the pre-tightening process, and can also be used in other similar needs.

Double acting 250 ton hydraulic cylinder price, hydraulic piston return; piston rod plating 40Cr metal layer Increase surface brightness and hardness Prevent air corrosion; the piston and the guide ring are made of copper, which is more wear resistant. The special guide ring design can withstand an eccentric load of up to 5% of the rated load capacity of the double acting 250 ton hydraulic cylinder.

10000Psi double acting hydraulic cylinder price is widely used in road, railway, bridge, city interchange, hydropower station dam, rock and soil anchorage, high-rise buildings, slope reinforcement, tunnel and, our 10000Psi double acting hydraulic cylinder price is been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on. If you want to know 10000Psi double acting hydraulic cylinder price, welcome to contact!

First, 100 ton single acting hydraulic mini lifting jack description: The single acting hydraulic jack with pump has a large stroke and a strong lifting capacity, and is the best choice for maintenance, manufacturing, construction and other operations. All models can be processed according to customer requirements, and the bottom is designed with mounting holes, which makes the installation and positioning convenient.
Second, the characteristics 100 ton single acting hydraulic mini lifting jack with pump: The piston part is welded with copper, the piston rod is coated with hard chrome, never pulls the cylinder, and the wear resistance is strong. High temperature baking varnish, surface abrasion resistance, corrosion resistance and impact. Single-acting design, spring retraction (reset). High strength alloy steel is durable.

Leadcrete Company produces 250 ton double acting jacks hydraulic cylinders for pile foundation testing. It has the characteristics of large output force, light weight and long-distance operation. 250 ton double acting jacks hydraulic cylinders is equipped with high-pressure electric oil pump station of the factory, which can realize various forms of operation such as top, push, pull and squeeze. Used in construction, shipbuilding, metallurgy, mining, petrochemical, railway engineering and other industries, such as jacking, stretching, pressing and other operations. In recent years, 250 ton double acting jacks hydraulic cylinders has been widely used in foundation settlement tests and static piles.

Leadcrete brand Double acting 200 ton hydraulic cylinder/jack/ram and electric oil pump for sale to. The tonnage of this hydraulic jack is 630 tons with 500mm stoke. Because our double acting hydraulic jack own have the follow advantages, it is accepted by many different customers. Double acting 200 ton hydraulic cylinder/jack/ram is suitable for high-tonnage lifting operations, and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, its hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

First, 150 ton high technical support single acting high tonnage hydraulic jack description: The single acting hydraulic jack with pump has a large stroke and a strong lifting capacity, and is the best choice for maintenance, manufacturing, construction and other operations. All models can be processed according to customer requirements, and the bottom is designed with mounting holes, which makes the installation and positioning convenient.
Second, the characteristics 150 ton high technical support single acting high tonnage hydraulic jack with pump: The piston part is welded with copper, the piston rod is coated with hard chrome, never pulls the cylinder, and the wear resistance is strong. High temperature baking varnish, surface abrasion resistance, corrosion resistance and impact. Single-acting design, spring retraction (reset). High strength alloy steel is durable.