Post tension stressing equipment jack

Hydraulic jack cylinder can be equipped with a two-way manual oil pump or a two-way electric oil pump. Because of the through hole in the middle, the hollow jack not only has the lifting capacity of a general hydraulic jack, but also has the stretching and tensioning functions that the ordinary jack does not have. The through hole allows cables, steel ropes and other shafts to pass through. The hollow roof has double functions and hydraulic retraction. Hydraulic jack cylinder is the first choice for various large-scale projects. It has the characteristics of convenient operation and control. The new technology and structure make the hollow roof Jacks are safer and last longer.

Electric prestressing jack for construction and bridge structure is compact, the work is smooth, the oil pressure is high, the tension is large, electric prestressing jack for construction and bridge is widely used in highway bridges, railway bridges, hydroelectric dams, high-rise buildings and other pre-stress construction projects.

Product line of single acting low height lock nut hydraulic jack as follow: industrial tools, lock nuts provide reliable mechanical load retention, low friction locking ring for easy rotation, saving time and effort, designed to withstand 10% lateral load and withstand up to 90% of maximum stroke, hardened surface resists lateral loads and periodic wear. The overflow port acts as a stroke limiter to prevent the plunger from bursting, both inside and outside are protected by weather, replaceable bearings enclose the plunger to provide support throughout the stroke; certified lifting lugs and base mounting holes. If you want to know more single acting low height lock nut hydraulic jack information, please contact us!

Single acting thin hydraulic jack pancake hydraulic jack is suitable for high-tonnage lifting operations, and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, single acting thin hydraulic jack pancake hydraulic jack hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

When the double acting high tonnage hydraulic piston cylinder is lifnting, it is necessary to select a hydraulic jack suitable for tonnage:
The carrying capacity of the double-acting high tonnage hydraulic piston cylinder should be greater than 1.2 times the gravity of the weight; the minimum height of the hydraulic jack is suitable. For the convenience of taking out, the minimum height of the double-acting high tonnage hydraulic piston cylinder should be adapted to the clearance at the bottom of the weight. When the bolster supports heavy objects during the landing, the lifting height of the hydraulic jack is greater than the sum of the ties and the occipital deformation.

Leadcrete brand 200t double acting ended high tonnage pull hydraulic cylinder and electric oil pump for sale to. The tonnage of this hydraulic jack is 200 tons with 200mm stoke. Because our 200t double acting ended high tonnage pull hydraulic cylinder own have the following advantages, it is accepted by many different customers. Double acting hydraulic jack is suitable for high-tonnage lifting operations, and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, its hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

Double acting hydraulic cylinder/jack/ram is a power tool. To avoid the possibility of a major injury, read all instructions carefully before using a double-acting hydraulic cylinder/jack/ram, warnings and precautions, and comply with the safety measures to avoid damage to persons or equipment occurring when the operation of the device!

Our Lead equipment entered the hydraulic tool industry earlier, specializing in scientific research and development, production and operation of hydraulic jack, electric pump for 30 years. 300Ton Double Acting steel Hydraulic Piston Cylinder With Ce Certificate are widely used in road, railway, bridge, city interchange, hydropower station dam, rock and soil anchorage, high-rise buildings, slope reinforcement, tunnel and, our products have been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on.

high-pressure double-acting hydraulic lift cylinder can be used for the maintenance of large machinery, the overall lifting of the bridge, the maintenance of the hydropower plant gate, the lifting of the steel structure and the installation of supporting equipment. If you want to know more high-pressure double-acting hydraulic lift cylinder information, please contact us!

Our Lead equipment entered the hydraulic tool industry earlier, specializing in scientific research and development, production and operation of 500 ton double acting hydraulic lift cylinders for sale, electric pump for 30 years. 500 ton double acting hydraulic lift cylinders for sale are widely used in road, railway, bridge, city interchange, hydropower station dam, rock and soil anchorage, high-rise buildings, slope reinforcement, tunnel and, our products have been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on.

10000Psi double acting hydraulic cylinder price is widely used in road, railway, bridge, city interchange, hydropower station dam, rock and soil anchorage, high-rise buildings, slope reinforcement, tunnel and, our 10000Psi double acting hydraulic cylinder price is been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on. If you want to know 10000Psi double acting hydraulic cylinder price, welcome to contact!

50 ton single acting thin hydraulic jack cylinder can be used for the maintenance of large machinery, the overall lifting of the bridge, the maintenance of the hydropower plant gate, the lifting of the steel structure and the installation of supporting equipment. If you want to know more 50 ton single acting thin hydraulic jack cylinder price, please contact us!

Double acting hydraulic piston cylinder can be used for the maintenance of large machinery, the overall lifting of the bridge, the maintenance of the hydropower plant gate, the lifting of the steel structure and the installation of supporting equipment. If you want to know more double acting hydraulic piston cylinder information, please contact us!

The characteristics 650-ton double acting hydraulic jack with pump: The piston part is welded with copper, the piston rod is coated with hard chrome, never pulls the cylinder, and the wear resistance is strong. High-temperature baking varnish, surface abrasion resistance, corrosion resistance, and impact. Double-acting design, spring retraction (reset). High-strength alloy steel is durable.

Double acting hydraulic lift cylinder for fitness equipment can be used for the maintenance of large machinery, the overall lifting of the bridge, the maintenance of the hydropower plant gate, the lifting of the steel structure and the installation of supporting equipment. If you want to know more double acting hydraulic lift cylinder for fitness equipment information, please contact us!

The application of 300ton double acting steel hydraulic piston cylinder Made In China:
1. If the oil quantity of the pump body is insufficient, it is necessary to first add working oil (10# oil) to the pump to work.
2, estimated weight, should not be overloaded.
3. Determine the center of gravity of the lifting object and select the point of gravity of the jack. At the same time, it must take into account whether the softness and hardness of the ground are padded with tough wood to avoid the risk of dumping when lifting.
4. After the jack lifts the heavy object, the heavy material should be supported in time with the tough wood. It is forbidden to use the jack as a support. It is forbidden to use several jacks at the same time to avoid the imbalance of load and the danger of dumping.
5. When using, first connect the quick joint of the manual pump to the top, then select the position and screw the oil drain screw on the oil pump to work. Loosen the oil drain screw and unload the cylinder.
6. Please refer to the instruction manual for the electric pump.

The carrying capacity of the single acting 300 ton low profile hydraulic jack with locking collar should be greater than 1.2 times the gravity of the weight; the minimum height of the single acting 300 ton low profile hydraulic jack with locking collar is suitable. For the convenience of taking out, the minimum height of the hydraulic jack should be adapted to the clearance at the bottom of the weight. When the bolster supports the heavy objects during the landing, the lifting height of the single acting 100 ton low profile hydraulic jack with locking collar is greater than the sum of the ties and the occipital deformation.

Super high-pressure small hydraulic piston cylinder should be placed flat before use, can not be skewed, and the bottom should be leveled. Beware of the foundation subsidence or load deviation, the hydraulic jack can be tilted or tipped over and can be extended with a tough pillow or steel plate at the bottom of the super high-pressure small hydraulic piston cylinder. Pressure-bearing area to prevent death or slippage; do not use oily wood or steel plate as a cushion to prevent slipping when force is applied, and safety incidents occur; the weight should be lifted and the position must be safe and solid. Anti-damage equipment (hydraulic jack).

Lead Company produces large tonnage 500 ton double acting hydraulic jack for pile foundation testing.Large tonnage 500 ton double acting hydraulic jack has the characteristics of large output force, light weight and long-distance operation. Large tonnage 500 ton double acting hydraulic jack is equipped with high-pressure electric oil pump station of the factory, which can realize various forms of operation such as top, push, pull and squeeze.

We have many types of hydrualic jacks: single acting spring return hydraulic cylinder, single-acting thin jacks, single acting spring return hydraulic cylinder are all hydraulic jacks–leadcrete company professional planning to build. Different types of single acting spring return hydraulic cylinder use methods and operating precautions are not the same, thin hydrualic jacks, hydraulic cylinder more volume Small, with more working ability, especially in the local application with narrow spatial orientation, and has the functions of simple and flexible, strong top force.

Heavy duty hollow hydraulic cylinder for bridge construction can be used for the maintenance of large machinery, the overall lifting of the bridge, the maintenance of the hydropower plant gate, the lifting of the steel structure and the installation of supporting equipment. If you want to know more heavy duty hollow hydraulic cylinder for bridge construction price, please contact us!

200 ton double acting hollow plunger hydraulic lift steel strand jack system for lifting\pulling combines all the design features of single-acting and the superiority of double-acting design, thereby improving the operation and use speed, especially in the relatively long stroke operation. The 200 ton double acting hollow plunger hydraulic lift steel strand jack system for lifting\pulling has a through hole in the piston center, which is widely used in nuclear power plants, tunnel engineering, underground engineering, construction and other occasions to realize the pre-tightening process, and can also be used in other similar needs.

The post tension jack for post tensioning tension equipment are used pre-stress steel wire and bridge pulling. The post tension jack for post tensioning tension equipment need match oil pump use, the power of the tension and the lift is provided by the high pressure oil at the tension pump.

Low profile horizontal hydraulic piston cylinder own have the follow advantages, low profile horizontal hydraulic piston cylinder is accepted by many different customers. Double acting hydraulic jack is suitable for high-tonnage lifting operations, and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, low profile horizontal hydraulic piston cylinder hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

Leadcrete Company produces 250 ton double acting jacks hydraulic cylinders for pile foundation testing. It has the characteristics of large output force, light weight and long-distance operation. 250 ton double acting jacks hydraulic cylinders is equipped with high-pressure electric oil pump station of the factory, which can realize various forms of operation such as top, push, pull and squeeze. Used in construction, shipbuilding, metallurgy, mining, petrochemical, railway engineering and other industries, such as jacking, stretching, pressing and other operations. In recent years, 250 ton double acting jacks hydraulic cylinders has been widely used in foundation settlement tests and static piles.

Double acting high tonnage hydraulic jacks can be used for the maintenance of large machinery, the overall lifting of the bridge, the maintenance of the hydropower plant gate, the lifting of the steel structure and the installation of supporting equipment.

The carrying capacity of the Single acting high tonnage lock nut hydraulic cylinder should be greater than 1.2 times the gravity of the weight; the minimum height of the hydraulic jack is suitable. For the convenience of taking out, the minimum height of the hydraulic jack should be adapted to the clearance at the bottom of the weight. When the bolster supports heavy objects during the landing, the lifting height of the Single acting high tonnage lock nut hydraulic cylinder is greater than the sum of the ties and the occipital deformation.

100 ton single acting Ultra-thin hydraulic press cylinder should be placed flat before use, can not be skewed, and the bottom should be leveled. Beware of the foundation subsidence or load deviation, the hydraulic jack can be tilted or tipped over, and can be extended with a tough pillow or steel plate at the bottom of the 100 ton single acting Ultra-thin hydraulic press cylinder. Pressure-bearing area to prevent death or slippage; do not use oily wood or steel plate as a cushion to prevent slipping when force is applied, and safety incidents occur; the weight should be lifted and the position must be safe and solid. Anti-damage equipment (hydraulic jack).

Factory supply double acting prestress equipment jack is compact, the work is smooth, the oil pressure is high, the tension is large. Factory supply double acting prestress equipment jack is widely used in highway bridges, railway bridges, hydroelectric dams, high-rise buildings and other pre-stress construction projects.

Lead Equipment Co., Ltd is a professional manufacturer of 700bar double acting 500 ton low profile hydraulic lifting ram jack with power pack in China. We could make kinds of standard and non-standard 700bar double acting 500 ton low profile hydraulic lifting ram jack with oil pump. The following is our 700bar double acting 500 ton low profile hydraulic lifting ram jack with power pack, they are sent to Greece.