Post tension jack for post tensioning tension equipment

When the double acting high tonnage hydraulic piston cylinder is lifnting, it is necessary to select a hydraulic jack suitable for tonnage:
The carrying capacity of the double-acting high tonnage hydraulic piston cylinder should be greater than 1.2 times the gravity of the weight; the minimum height of the hydraulic jack is suitable. For the convenience of taking out, the minimum height of the double-acting high tonnage hydraulic piston cylinder should be adapted to the clearance at the bottom of the weight. When the bolster supports heavy objects during the landing, the lifting height of the hydraulic jack is greater than the sum of the ties and the occipital deformation.

If multiple 200 ton high efficiency single acting high tonnage lock nut hydraulic jack are used to lift the same equipment, the same type of hydraulic jacks should be used, and the sum of the additional lifting weight of each hydraulic jack should not be less than 1.5 times the gravity of the equipment. 200 ton high efficiency single acting high tonnage lock nut hydraulic jack should be wiped clean before use, and should check whether the components can be active, whether there is any damage, avoid loading the quick joints when there is load, to prevent the occurrence of faults and damaged parts.

Heavy duty hollow hydraulic cylinder for bridge construction can be used for the maintenance of large machinery, the overall lifting of the bridge, the maintenance of the hydropower plant gate, the lifting of the steel structure and the installation of supporting equipment. If you want to know more heavy duty hollow hydraulic cylinder for bridge construction price, please contact us!

The manufacturer price single acting hydraulic jack cylinder has a very low closing height and is suitable for limited space. Manufacturer price single acting hydraulic jack cylinder is can be used for highway bridge maintenance, ship diesel engine maintenance adjustment, power plant wind power equipment maintenance adjustment and other synchronous lifting instead of rubber bearings.

In the word, the YDC series post tension electric stressing mono tension jack’ performance is improved, and widely used in pre-stressing and post stressing construction. If you are interested in post tension electric stressing mono tension jack prices, pls contact us freely.

If multiple 200 ton double acting hydraulic hollow ram are used to lift the same equipment, the same type of 200 ton double acting hydraulic hollow ram should be used, and the sum of the additional lifting weight of each 200 ton double acting hydraulic hollow ram should not be less than 1.5 times the gravity of the equipment. Hydraulic jacks should be wiped clean before use and should check whether the components can be active, whether there is any damage, avoid loading the quick joints when there is load, to prevent the occurrence of faults and damaged parts.

Hydraulic cylinder and electric hydraulic pump for mono strand stress jack must be on a sturdy surface so that it can withstand the load, the load must be placed in the center, covering all pistons, can only load stationary object. If the electric hydraulic pump for mono strand stress jack is damaged, deformed, or in need of repair, do not use! When the hydraulic jack cylinder reciprocating action must be extended without hindrance, to ensure complete phase contact, only when all the piston is fully retracted in order to pump the fuel.

300 ton double acting electric hydraulic cylinder jack special guide ring design can withstand an eccentric load of up to 5% of the rated load capacity of the jack. 300 ton double acting electric hydraulic cylinder jack is equipped with a dust-proof ring to prevent dust from entering the cylinder. All models include quick connectors and dust caps. Up to 13 seals inside the cylinder to ensure sealing performance and extend service life.

The load return high tonnage lock nut hydraulic lifting cylinder combines with the functions of other jacks. The safety of the load return high tonnage lock nut hydraulic lifting cylinder is suitable for the long-term extension of the piston to support the load. The load return high tonnage lock nut hydraulic lifting cylinder maintains mechanical load for long periods of time. Available in low-profile, lightweight or high-tonnage models with capacities ranging from 20 to 1000 tons and stroke lengths from 45 mm to 300 mm.

Lead Equipment Co., Ltd is a professional manufacturer of 700bar double acting 500 ton low profile hydraulic lifting ram jack with power pack in China. We could make kinds of standard and non-standard 700bar double acting 500 ton low profile hydraulic lifting ram jack with oil pump. The following is our 700bar double acting 500 ton low profile hydraulic lifting ram jack with power pack, they are sent to Greece.

Double-acting hydraulic cylinder and electric oil pump for sale to Russia. The tonnage of this hydraulic jack is 200 tons with a 200mm stroke. If you want to know more double-acting hydraulic cylinder information, please contact us!

high-pressure double-acting hydraulic lift cylinder can be used for the maintenance of large machinery, the overall lifting of the bridge, the maintenance of the hydropower plant gate, the lifting of the steel structure and the installation of supporting equipment. If you want to know more high-pressure double-acting hydraulic lift cylinder information, please contact us!

The design of CLL cheap single acting self-locking type hydraulic jack is the perfect combination of hydraulic principle and mechanical principle. Cheap single acting self-locking type hydraulic jack has thread in the whole stroke range of volcano rod. After fully lifting, the self-locking nut can be unscrewed until it is against the cylinder block. Free lock nut and the cylinder is stressed, so that the oil pump can be removed, which is especially suitable for the continuous and test operation of the truss and truss.

The hot sale China prestressing steel jack for post tensioning is mainly used for the overall pulling force of the group anchor. The jack is easy to operate, reliable and saves steel strands than other types of jacks. Hot sale China prestressing steel jack for post tensioning is mainly used for bridge construction and other projects that use products such as anchor bolts and tensile equipment. If you want to know more hot sale China prestressing steel jack for post tensioning information, please contact us!

Leadcrete brand single acting hydraulic cylinder jack and electric oil pump for sale. Because our double acting hydraulic jack own have the follow advantages, it is accepted by many different customers. single acting hydraulic cylinder jack is suitable for high-tonnage lifting operations and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, its hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

Double acting hydraulic cylinder for ship synchronous lifting and maintenance should be placed flat before use, can not be skewed, and the bottom should be leveled. Beware of the foundation subsidence or load deviation, the hydraulic jack can be tilted or tipped over, and can be extended with a tough pillow or steel plate at the bottom of the double acting hydraulic cylinder for ship synchronous lifting and maintenance. Pressure-bearing area to prevent death or slippage; do not use oily wood or steel plate as a cushion to prevent slipping when force is applied, and safety incidents occur; the weight should be lifted and the position must be safe and solid. Anti-damage equipment (hydraulic jack).

The factory price synchronous hydraulic jack cylinders is mainly used for lifting heavy object. If you tell me your tonnage, stroke, center hole and outer diameter, etc. We can make factory price synchronous hydraulic jack cylinders according to your detail requirement. If you want to know more factory price synchronous hydraulic jack cylinders information,please contact us!

The attention of 200 ton single acting small high tonnage hydraulic jack for lifting :
a) If there is a blanking phenomenon during working, first loosen the oil drain screw on the pump body, and then open vertically pump body and turn it down a few times, then tighten the oil drain screw to continue using.
b) When there is load, it is forbidden to remove the quick connector to avoid accidents and damage to the machine.
c) This machine uses oil as the medium. It is necessary to do the maintenance work of the oil and the machine to avoid fouling or oil leakage and affect the use effect.

Lead Equipment Co., Ltd. is a manufacturer of production, design, assembly, sales and integration of 300 ton cheap double acting high tonnage hydraulic cylinder jack. The company has many years of production and sales of 300 ton cheap double acting high tonnage hydraulic cylinder jack. Manual / electric oil pumps are the main products. The main products are: hydraulic jacks, hydraulic cylinders, hollow cylinders, manual oil pumps, electric oil pumps, pump stations, and a series of hydraulic supporting products.

Leadcrete Company produces 500 ton double acting hydraulic jack for pile load test. It has the characteristics of large output force, light weight and long-distance operation. 500 ton double acting hydraulic jack for pile load test is equipped with high-pressure electric oil pump station of the factory, which can realize various forms of operation such as top, push, pull and squeeze. Used in construction, shipbuilding, metallurgy, mining, petrochemical, railway engineering and other industries, such as jacking, stretching, pressing and other operations. In recent years, 500 ton double acting hydraulic jack for pile load test has been widely used in foundation settlement tests and static piles.

The characteristics 650-ton double acting hydraulic jack with pump: The piston part is welded with copper, the piston rod is coated with hard chrome, never pulls the cylinder, and the wear resistance is strong. High-temperature baking varnish, surface abrasion resistance, corrosion resistance, and impact. Double-acting design, spring retraction (reset). High-strength alloy steel is durable.

Our Lead equipment entered the hydraulic tool industry earlier, specializing in scientific research and development, production and operation of 400tons stroke 300mm double acting hydraulic jack, electric pump for 30 years. Products are widely used in road, railway, bridge, city interchange, hydropower station dam, rock and soil anchorage, high-rise buildings, slope reinforcement, tunnel and, our 400tons stroke 300mm double acting hydraulic jack have been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on.

Leadcrete Company produces 100 ton double acting steel hydraulic jack for pile foundation testing. It has the characteristics of large output force, light weight and long-distance operation. It is equipped with high-pressure electric oil pump station of the factory, which can realize various forms of operation such as top, push, pull and squeeze. Used in construction, shipbuilding, metallurgy, mining, petrochemical, railway engineering and other industries, such as jacking, stretching, pressing and other operations. In recent years, 100 ton double acting steel hydraulic jack has been widely used in foundation settlement tests and static piles.

As a professional price for post tensioning equipment jack manufacturer, Leadcrete has produces a variety of series of post tensioning equipment jack, center hole hydraulic jacks, such as single acting center hole hydraulic jack, double acting center hole hydraulic jack and so on.

700 bar RCH single acting hollow plunger lift ram piston hydraulic cylinder is suitable for high-tonnage lifting operations, and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, 700 bar RCH single acting hollow plunger lift ram piston hydraulic cylinder hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

Lead Equipment Co., Ltd is a professional manufacturer of hydraulic cylinder for pulling with power pack in China. We could make kinds of standard and non-standard hydraulic cylinders for pulling with the oil pump.

Our Lead equipment entered the hydraulic tool industry earlier, specializing in scientific research and development, production and operation of 250 ton steel double acting hydraulic cylinders, electric pump for 30 years. 250 ton steel double acting hydraulic cylinders are widely used in road, railway, bridge, city interchange, hydropower station dam, rock and soil anchorage, high-rise buildings, slope reinforcement, tunnel and, our products have been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on.

Double acting hydraulic cylinder/jack/ram is a power tool. To avoid the possibility of a major injury, read all instructions carefully before using a double-acting hydraulic cylinder/jack/ram, warnings and precautions, and comply with the safety measures to avoid damage to persons or equipment occurring when the operation of the device!

The carrying capacity of the700 bar RRH type 200 ton double acting hollow hydraulic jack should be greater than 1.2 times the gravity of the weight; the minimum height of the hydraulic jack is suitable. For the convenience of taking out, the minimum height of the 700 bar RRH type 200 ton double acting hollow hydraulic jack should be adapted to the clearance at the bottom of the weight. When the bolster supports the heavy objects during the landing, the lifting height of the hydraulic jack is greater than the sum of the ties and the occipital deformation.

400 ton 45mm stroke single acting pancake lock nut hydraulic jack can be used for the maintenance of large machinery, the overall lifting of the bridge, the maintenance of the hydropower plant gate, the lifting of the steel structure and the installation of supporting equipment. If you want to know more 400 ton 45mm stroke single acting pancake lock nut hydraulic jack information, please contact us!