350 ton double acting high tonnage hydraulic cylinder

600 ton hollow hydraulic oil cylinder can be used for the maintenance of large machinery, the overall lifting of the bridge, the maintenance of the hydropower plant gate, the lifting of the steel structure and the installation of supporting equipment. If you want to know more 600 ton hollow hydraulic oil cylinder information, please contact us!

Our Lead equipment entered the hydraulic tool industry earlier, specializing in scientific research and development, production and operation of 400tons stroke 300mm double acting hydraulic jack, electric pump for 30 years. Products are widely used in road, railway, bridge, city interchange, hydropower station dam, rock and soil anchorage, high-rise buildings, slope reinforcement, tunnel and, our 400tons stroke 300mm double acting hydraulic jack have been exported to the USA, Canada, India, Malaysia, Pakistan, Korea, Bahrain, Nepal, Azerbaijan, Mexico and so on.

We have many types of double acting piston hydraulic lifting jack for synchronous lifting pushing: thin jacks, single-acting thin jacks, thin hydraulic cylinders are all thin hydraulic jacks–lead company professional planning to build. Different types of double acting piston hydraulic lifting jack for synchronous lifting pushing use methods and operating precautions are not the same, thin hydrualic jacks, hydraulic cylinder more volume Small, with more working ability, especially in the local application with narrow spatial orientation, and has the functions of simple and flexible, strong top force.

Leadcrete is a professional high pressure 10000psi single acting hydraulic jack for pulling supplier in the design, production, sale and service of hydraulic jack.

The 600-ton double-acting hollow plunger hydraulic lifting cylinder can be equipped with a two-way manual oil pump or a two-way electric oil pump. Because of the through hole in the middle, the hollow jack not only has the lifting capacity of a general hydraulic jack but also has the stretching and tensioning functions that the ordinary jack does not have. The through hole allows cables, steel ropes, and other shafts to pass through. The hollow roof has double functions and hydraulic retraction. The 600-ton double-acting hollow plunger hydraulic lifting cylinder is the first choice for various large-scale projects. It has the characteristics of convenient operation and control. The new technology and structure make the hollow roof jacks are safer and last longer.

Double acting hydraulic jack is suitable for high-tonnage lifting operations, and requires high precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, its hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

Factory supply double acting prestress equipment jack is compact, the work is smooth, the oil pressure is high, the tension is large. Factory supply double acting prestress equipment jack is widely used in highway bridges, railway bridges, hydroelectric dams, high-rise buildings and other pre-stress construction projects.

The characteristics 200-ton single-acting steel hollow plunger 700 Bar hydraulic jack: The piston part is welded with copper, the piston rod is coated with hard chrome, never pulls the cylinder, and the wear resistance is strong. High-temperature baking varnish, surface abrasion resistance, corrosion resistance and impact. Single-acting design, spring retraction (reset). High-strength alloy steel is durable.

High quality standard heavy industry hydraulic cylinder 300 ton can be used for the maintenance of large machinery, the overall lifting of the bridge, the maintenance of the hydropower plant gate, the lifting of the steel structure and the installation of supporting equipment.

Single acting spring return hydraulic cylinder jack ram characteristics:
1. Single acting spring return hydraulic cylinder jack ram , large flow quick connector, can be used for push-pull.
2. The piston part and the inner side of the guide cap are welded with copper, never pulling the cylinder, and the wear resistance is strong.
3. Honing inside the cylinder , the piston rod is hard chrome plated to prevent scratches and corrosion.
4. The extended stroke cylinder can be customized according to customer requirements.
5. In addition to vertical use, the jack can also achieve the above functions in any orientationsuch as lying, inverting, tilting, and the like.

In order to guarantee our 200tons hydraulic hollow jack cylinder with hydraulic power pack can be exported to European countries, we apply two CE Certificates for our 200tons hydraulic hollow jack cylinder and electric power pack. So it is no any problem that our hydraulic jack for sale to European countries. If you want to know more 20tons single acting hydraulic hollow jack cylinder information, please contact us!

Lead Equipment Co., Ltd is a professional manufacturer of 700bar double acting 500 ton low profile hydraulic lifting ram jack with power pack in China. We could make kinds of standard and non-standard 700bar double acting 500 ton low profile hydraulic lifting ram jack with oil pump. The following is our 700bar double acting 500 ton low profile hydraulic lifting ram jack with power pack, they are sent to Greece.

Leadcrete Company produces 100 ton double acting steel hydraulic jack for pile foundation testing. It has the characteristics of large output force, light weight and long-distance operation. It is equipped with high-pressure electric oil pump station of the factory, which can realize various forms of operation such as top, push, pull and squeeze. Used in construction, shipbuilding, metallurgy, mining, petrochemical, railway engineering and other industries, such as jacking, stretching, pressing and other operations. In recent years, 100 ton double acting steel hydraulic jack has been widely used in foundation settlement tests and static piles.

Double-acting electric hydraulic jack used in construction, shipbuilding, metallurgy, mining, petrochemical, railway engineering and other industries, such as jacking, stretching, pressing, and other operations. In recent years, a double-acting electric hydraulic jack has been widely used in foundation settlement tests and static piles.

High strength double acting high tonnage hydraulic jack can be used for the maintenance of large machinery, the overall lifting of the bridge, the maintenance of the hydropower plant gate, the lifting of the steel structure and the installation of supporting equipment. If you want to know more about high strength double acting high tonnage hydraulic jack prices, please contact us!

High quality 1000 ton double acting 700bar hydraulic cylinder, hydraulic piston return; piston rod plating 40Cr metal layer Increase surface brightness and hardness Prevent air corrosion; the piston and the guide ring are made of copper, which is more wear resistant. High quality 1000 ton double acting 700bar hydraulic cylinder special guide ring design can withstand an eccentric load of up to 5% of the rated load capacity of the jack.

The carrying capacity of the700 bar RRH type 200 ton double acting hollow hydraulic jack should be greater than 1.2 times the gravity of the weight; the minimum height of the hydraulic jack is suitable. For the convenience of taking out, the minimum height of the 700 bar RRH type 200 ton double acting hollow hydraulic jack should be adapted to the clearance at the bottom of the weight. When the bolster supports the heavy objects during the landing, the lifting height of the hydraulic jack is greater than the sum of the ties and the occipital deformation.

The attention of 200 ton single acting small high tonnage hydraulic jack for lifting :
a) If there is a blanking phenomenon during working, first loosen the oil drain screw on the pump body, and then open vertically pump body and turn it down a few times, then tighten the oil drain screw to continue using.
b) When there is load, it is forbidden to remove the quick connector to avoid accidents and damage to the machine.
c) This machine uses oil as the medium. It is necessary to do the maintenance work of the oil and the machine to avoid fouling or oil leakage and affect the use effect.

700 bar steel double acting 300 ton hydraulic hollow jack combines all the design features of single-acting and the superiority of double-acting design, thereby improving the operation and use speed, especially in the relatively long stroke operation. The 700 bar steel double acting 300 ton hydraulic hollow jack has a through hole in the piston center, which is widely used in nuclear power plants, tunnel engineering, underground engineering, construction and other occasions to realize the pre-tightening process, and can also be used in other similar needs.

150 ton hydraulic cylinder jack can be used for the maintenance of large machinery, the overall lifting of the bridge, the maintenance of the hydropower plant gate, the lifting of the steel structure and the installation of supporting equipment. 150 ton hydraulic cylinder jack.

China factory double acting electric hydraulic jack price and electric pump must be on a sturdy surface so that it can withstand the load, the load must be placed in the center, covering all pistons, can only load stationary object. If the hydraulic oil pump is damaged, deformed, or in need of repair, do not use! When the China factory double acting electric hydraulic jack reciprocating action must be extended without hindrance, to ensure complete phase contact, only when all the piston is fully retracted in order to pump the fuel. If you want to know more China factory double acting electric hydraulic jack price,please contact us!

In the word, the YDC series post tension electric stressing mono tension jack’ performance is improved, and widely used in pre-stressing and post stressing construction. If you are interested in post tension electric stressing mono tension jack prices, pls contact us freely.

200 ton double acting hollow plunger hydraulic lift steel strand jack system for lifting\pulling combines all the design features of single-acting and the superiority of double-acting design, thereby improving the operation and use speed, especially in the relatively long stroke operation. The 200 ton double acting hollow plunger hydraulic lift steel strand jack system for lifting\pulling has a through hole in the piston center, which is widely used in nuclear power plants, tunnel engineering, underground engineering, construction and other occasions to realize the pre-tightening process, and can also be used in other similar needs.

Double-acting hollow hydraulic jack is suitable for high-tonnage lifting operations, and requires high-precision control of object lifting and maintenance operations. In the tunnel pipe horizontal displacement installation, Double acting hollow hydraulic jack hydraulic reset design can quickly and effectively retract the piston to its original position, ready to advance the next pipe.

If multiple single acting flat hydraulic jack are used to lift the same equipment, the same type of single acting flat hydraulic jack should be used, and the sum of the additional lifting weight of each hydraulic jack should not be less than 1.5 times the gravity of the equipment. Hydraulic jacks should be wiped clean before use, and should check whether the components can be active, whether there is any damage, avoid loading the quick joints when there is load, to prevent the occurrence of faults and damaged parts.

High-quality 250-ton hydraulic cylinder can be used for the maintenance of large machinery, the overall lifting of the bridge, the maintenance of the hydropower plant gate, the lifting of the steel structure, and the installation of supporting equipment. If you want to know more high-quality hydraulic cylinder information, please contact us!

The attention of 250 ton double acting solid hydraulic ram jack with pump for sale:
a) If there is a blanking phenomenon during working, first loosen the oil drain screw on the pump body, and then open vertically pump body and turn it down a few times, then tighten the oil drain screw to continue using.
b) When there is load, it is forbidden to remove the quick connector to avoid accidents and damage to the machine.
c) This 250 ton double acting solid hydraulic ram jack uses oil as the medium. It is necessary to do the maintenance work of the oil and the machine to avoid fouling or oil leakage and affect the use effect.

Double-acting high tonnage hydraulic cylinder, hydraulic piston return; piston rod plating 40Cr metal layer Increase surface brightness and hardness Prevent air corrosion; the piston and the guide ring are made of copper, which is more wear-resistant. The special guide ring design can withstand an eccentric load of up to 5% of the rated load capacity of the double-acting high-tonnage hydraulic cylinder.

High quality single-acting lifting hydraulic cylinder description: The high quality single-acting lifting hydraulic cylinder with pump has a large stroke and a strong lifting capacity, and is the best choice for maintenance, manufacturing, construction and other operations. All models can be processed according to customer requirements, and the bottom is designed with mounting holes, which makes the installation and positioning convenient.

In the word, the YDC series bridge hydraulic jack for concrete post tension ‘ performance is improved, and widely used in pre-stressing and post stressing construction. If you are interested in our bridge hydraulic jack for concrete post tension , pls contact us freely.