Diesel hose type concrete pump supplier

Industrial peristaltic pump head for pumping concrete is known as hose pump and squeeze pump, because of it owning much more advantages than other pumps, such as high self-priming, no seals and valves, dry-running without damage, only tube to replace etc, peristaltic pump application is very wide, for example, construction, pharmacy, textile mill, dye making, water treatment, mining, ceramic, brewery, beverage and TBM project.

We have developed full series of hose type concrete pump for sale, output from 15m3/h to 45m3/h, working pressure is from 2.5MPa to 3MPa. Electric motor, diesel engine and hydraulic motor are available options for customization.

High flow hose squeeze pumps for ceramic are mainly applied in distant conveying, grouting and dosing of viscous slurries in construction, mining, food, paper-making, ceramic, etc. We customize hose pumps for different customers.

Peristaltic pumps are ideal for mining and heavy industry due to their simple design, superior solid handling, suction lift and run dry capabilities. Industrial slurries have claimed the life of many a poorly selected pump, the combination of pumping product that is highly abrasive, typically contains solids north of 70% by weight and specific gravities (SG) far greater than that of water can result in frequent and expensive maintenance overheads or worse still replacing the pump altogether.

Peristaltic pump high flow is new type, multi-function industrial hose pump. Peristaltic pump high flow is completely out of the traditional pump impeller and shaft seal operation mode, pumping viscosity, corrosive large, fluid impurities of the medium transport has great advantages, and compared with traditional pump, perstaltic pump has a different principle and a wide range of applications.

Trelleborg hose of squeeze hose pump has the characteristics of long service life and a wide application range. Its structure is a high-strength synthetic fiber braid layer reinforced by one or more layers. The inner and outer linings of the Trelleborg squeeze hose are extruded, and the composite rubber lining is used. The tube body is soft, elastic, and has good wear resistance. Synthetic fibers are added to the pipe body to enhance its overall performance of the pipe body. Low heat generation during use, good resilience, and durability.

The squeeze pump hose for the extruding pump produced by our company is widely used in the pump body accessories for the construction of highways, tunnels, bridges, water conservancy, mine lines, and other construction projects, and also can be used for spraying large areas of wall bottom layer and various types of the cover layer, after the pressure grouting, mortar transport foundation construction pressure grouting, in the GRC industry to make glass fiber reinforced cement products to make large and medium-sized precast concrete components in the petrochemical metallurgy industry used in blast furnace inner wall spray perfect fire material.

High Quality Hose Pump To Pump Sewage In Dubai could be widely used in many project, such as architecture, underground construction, petrochemical industry, metallurgy, food industry, ceramic, mining, water treatment, hydrocarbon sludge pumping etc.

The working principle of the Peristaltic pump for pumping foam concrete is that a special rubber hose with a smooth inner wall and strong strength is installed inside the pump body. It is kneaded along the hose through a pair of pressure rollers. This rotation causes the medium to be transported in one direction. After the medium is transported, the elasticity of the squeezed hose and the force of the side guide rollers restore the original. At this moment, a high vacuum is generated in the hose to suck the medium into the lumen again, and the medium will follow it. The pressure roller is kneaded and discharged from the hose. In this way, the medium is continuously sucked and discharged.

Peristaltic pumps play an important role in wastewater treatment operations. For many years, peristaltic pumps have been used to treat impure, particle-containing water, and various abrasive, corrosive and toxic chemicals used to clean water.

The electric peristaltic pump for mining is easy to clean. Once the work is over and the hose pump need be cleaned. The operator only need insert a clean ball into the suction hole of the pump. The cleanball is simply pumped through the pump and delivery hose to ensure it is clean and clear.

Lead Equipment Co., Ltd. is a leading peristaltic pump for pumping foam concrete manufacturer in China, as well as a unique manufacturer with ISO 9001:2008, SGS and CE certificate in China.

Recently, we deliver hose pump exported to Singapore customer for pumping cement and mortar. The customer has received the hose pump and gave a high evaluation.

Factory Price Dosing Metering Peristaltic Pump is also name as peristaltic pump, which consists mainly of pump house, rotor, roller, idle roller, squeezes tube and driving unit.

It is also important to consider the power supply of the hose pump. Depending on the size and scope of your project, you may need to use an electric or hydraulic hose pump. Electric hose pumps are smaller, more compact and easier to control, making them ideal for small or indoor projects. Hydraulic hose pumps are larger and more powerful, capable of handling larger volumes of bentonite slurries and harsher outdoor conditions.

We are leading industrial peristaltic pump supplier in China, as well as a unique supplier. Our industrial peristaltic pump is suitable for handling aggressive, high viscosity, high density products, such as abrasive slurries, corrosive acids, gaseous liquids, sand/cement mortar ,liquid accelerator, etc. And also is used for dosing pump with 1% repeat precision.

Usually, in order to recommend suitable peristaltic pump for foam concrete pumping, working pressure and output capacity need be provided from customers’ working site. Considering that the voltage is different with ours, suitable voltage motor could be customize for customers. If electric power supply is not convenient, we could also provide diesel engine drive peristaltic pump.

High Efficiency Industrial Concrete Peristaltic Hose Pump is used for pumping sludge materials, no contact between product and mechanical parts, only squeezes hose to replace. It could be widely used in many project, such as architecture, underground construction, petrochemical industry, metallurgy, food industry, ceramic, mining, water treatment, hydrocarbon sludge pumping etc.

Popular multifunction hose peristaltic pump is a new, multi-functional, multi-purpose industrial pump. It can be used in chemical, petroleum, water treatment, medicine, food, metallurgy, mining, construction, building materials, ceramics, paper-making and other industries.

Wrapping the hose with a protective cover and curing it as part of the final bonding phase is the hose fabrication process. The hose is precision machine ground when it has cooled. This final stage distinguishes our hose from the several others on the market.

Durable industrial peristaltic pumps for pumping foam lightweight concrete is known as hose pump and squeeze pump, because of it owning much more advantages than other pumps, such as high self-priming, no seals and valves, dry-running without damage, only tube to replace etc.

High viscosity with ce iso peristaltic pump is nice quality, having a competitive price, get better feedback from customers.

Electric peristaltic hose pumps for waste water is a new, multi-functional, multi-purpose industrial pump. It can be used in chemical, petroleum, water treatment, medicine, food, metallurgy, mining, construction, building materials, ceramics, paper-making and other industries.

Industrial Concrete Squeeze Hose Pump For Sale is also name as peristaltic pump, which consists mainly of pump house, rotor, roller, idle roller, squeezes tube and driving unit. The squeeze hose is U-shape in pump house, when rotor drives rollers to rotate, hose is deformed. After the roller rotate, the deformed hose recover by its elasticity. Thus the negative pressure in this hose is generated, sucking slurry, and discharging through outlet under roller’s push, finally forms pressure conveying of slurry.

High Abrasion Rubber Hose Peristaltic Pump For Concrete Pumping is used for pumping sludge materials, no contact between product and mechanical parts, only squeezes hose to replace. It could be widely used in many project, such as architecture, underground construction, petrochemical industry, metallurgy, food industry, ceramic, mining, water treatment, hydrocarbon sludge pumping etc.

LH100-915 high pressure peristaltic pump for sale adopts special process squeeze hose, working pressure could be up to 26bar, output is 30m3/h, Max. Aggregate Size is 15mm. If you are interested in LH100-915 high pressure peristaltic pump, please contact us freely, sales1@leadcrete.com.

Oem supplier industrial dosing peristaltic concrete pump with best price could be widely used in many project, such as architecture, underground construction, petrochemical industry, metallurgy, food industry, ceramic, mining, water treatment, hydrocarbon sludge pumping etc.

Hose pump is also name as concrete hose squeeze peristaltic pump, which consists mainly of pump house, rotor, roller, idle roller, squeezes tube and driving unit. The squeeze hose is U-shape in pump house, when rotor drives rollers to rotate, hose is deformed. After the roller rotate, the deformed hose recover by its elasticity. Thus the negative pressure in this hose is generated, sucking slurry, and discharging through outlet under roller’s push, finally forms pressure conveying of slurry.

industrial pumping concrete squeeze hose pump are mainly applied in distant conveying, grouting and dosing of viscous slurries in construction, mining, food, paper-making, ceramic, etc. We customize hose pumps for different customers.

High-pressure steel wire hoses for transferring slurry are mainly used in hydraulic supports, oil field drilling, and mines, and are suitable for engineering construction, lifting, transportation, metallurgical forging, mining equipment, ships, injection molding machinery, agricultural machinery, various machine tools and mechanization and automation of various industrial sectors. The hydraulic system has a certain pressure (high pressure) and oil (such as mineral oil, soluble oil, hydraulic oil, fuel oil, lubricating oil) and water-based liquid (such as emulsion, oil-water emulsion, water) and hydraulic transmission, etc. The highest working pressure can reach 70-100 MPa.