Grouting plant and equipment

The compaction grouting equipment and grout pump with mixer is high efficiency and low cost, simple operation and convenient maintenance. Power option on the unit can be electric motor in addition to diesel according to customer requirement. It is a cost-effective ideal machine to meet your project requirements.

A grout machine for filling grout in ducts of post-tensioned cables is a specialized piece of equipment designed for the injection of grout into the ducts that house post-tensioned cables in construction.

Leadcrete Equipment is a best professional grout mixer pump manufacturer and supplier in China.

Epoxy air powered grout mixer pump for sale could be customized according to your flow, pressure and power request. So it could meet different projects request.

foundation grouting mixing plant

We supply grout unit for sale in Philippines, the grout unit for sale philippines is widely used in tunnel boring projects to stir and pump bentonite slurry with a pipe jack.

Hydraulic pressure grouting plant price is a popular product of Worldtek, which is exported to many countries around the world.

Grout plant is mainly used for filling of pipeline relining cavity, highway, railway, hydropower, construction, mining and other above-ground and underground engineering constructions.

High pressure grout plant for the underground coal industy also be also cement used in Qatar, for pumping of backfill mortar behind tunnel liners, grouting in the soil, earth foundation stabilization, waterproofing, tunnel lining, underwater foundations, bridge decks, deep well casing, slope line grouting, etc.

Grouting work was applied widely in dam, slope protection, bridge etc. projects. Sometime just grouting cement slurry will ok, but sometime need grouting mortar, if so, will add sand when making mortar slurry. Because the colloidal mixer mixing speed of electric hose pump grouting station with competitive price isvery fast, 1500rpm. If add sand directly, the impeller will be wearing very quickly. So how to making mortar slurry and grouting.

Electric grouting plant also be also used in Qatar, for pumping of backfill mortar behind tunnel liners, grouting in the soil, earth foundation stabilization, waterproofing, tunnel lining, underwater foundations, bridge decks, deep well casing, slope line grouting, etc. Electric grouting plant flow and pressure could be customized produced according to projects request.

Grouting cement plant is specially designed for mortar mixing and mortar injection. Grouting cement plant integrates a mixer, a double mixer, and a mortar pump, and is mainly used for ground/underground construction such as highways, railways, hydropower, buildings, and mines.

Grouting plant in civil engineering it is with double cylinder piston pump which could make grouting more stable and continuous, its hydraulic valve adopt Yuken valve which is famous Japan brand.

The drilling grout unit has a compact structure, integrating a pulping machine, agitator, and grouting pump in one base steel frame.

We has been researching and producing customized grout pump with mixer for tunnel grouting for many years, our products include grouting pump, grouting plant, grouting mixer and agitator, etc.

Grout station for tunnel grouting work is  Mainly suitable for mixing and pumping water, cement, sand, bentonite, filler, clay power, silicates and other additives.

The colloidal injection grout plant is mainly used for the construction of roads, railways, hydropower, construction, mines and other above-ground and underground projects.

Compact structure grouting cement slurry station is designed for safety and easy operation. After the mixing is completed, the mixed slurry is transferred from the mixer to the mixer by turning the handle, and then the pump sucks the slurry from the mixer to the grouting. At this time, the grout can be mixed again during grouting, and the mixing grouting is continuous.

Pressure injection grouting equipment consists of proven factory standard components agitator, agitator and grout pump. This setup is suitable for a wide range of applications such as anchoring, casing, contact, and backfill grouting. To increase throughput and enhance quality control, these plants are also available in semi-automatic and fully-automatic versions.

Bentonite cement grout plant is for pumping of backfill mortar behind tunnel liners, grouting in the soil, earth foundation stabilization, waterproofing, tunnel lining, underwater foundations, bridge decks, deep well casing, slope line grouting, etc.

China bentonite mixing plant with simple structure, light weight, easy maintenance, continuous output with small pulse, stable performance, convenient to operate and with long service life time etc. advantages.

Cementitious grout plant is used for foundation, mining, tunnel, dam foundation, soil compaction, rock grouting, infiltration grouting, water cutoff, void filling, soil anchoring, post-tensioning, contact grouting, ocean/underwater, prefabrication, bottom sealing, roof.

Grout plant is an all-in-one machine. The high-shear grouting mixer, agitator, and grouting pump are all concentrated on one device, which is very easy to operate and move, and can efficiently reduce consumption and reduce complexity. Program and remote operation.

compaction grouting equipment

Leadcrete Equipement is cement grouting plant supplier and manufacturer, grouting injection machine including the grout mixer, grout agitator and grout pump. Mixer, agitator and pump all on one base fame, so as called cement grouting plant or cement grout station are also provided.

Leadcrete Equipment is one leading pressure grouting plant for sale supplier in China, Pressure grouting plant for sale is mainly supply pressure grouting plant plant to Thailand, Singapore, Malaysia, Indonesia, Jordan, Qatar, UAE, etc. country.

Electric cement grouting plant consists of a mixing tank, an agitator tank and a high-pressure hydraulic grouting pump.

High shear grout plants are usually not the first choice for grouting services. In addition to wear and tear, some people may have difficulty handling the wide range of pressure outputs that are often required. Although similar pumps are used in some grouting mixers, they run more or less at a constant speed, and their limited use makes it not worthy of further details here.

The working process of grouting pump station is, put cement water etc. into mixer tank, after completely mixed, then put the slurry to agitator, the slurry in the agitator tank also be mixed in slow speed to avoided sedimentation. The pump’s suction is connected to the outlet of the agitator. Turn on the grout pump to start grouting. The whole process is continuous because of the mixer agitator pump all on one station.

The compact grouting and mixing plant consist of the proven factory standard components mixer, agitator and grout pump. This setup is suitable for a wide range of applications such as anchoring, sleeve pipe, contact and backfill grouting. For higher outputs and increased quality control, the grouting and mixing plants are also available in semi automated and fully automated versions.