High shear colloidal injection grout plant
We are a professional manufacturer of high shear colloidal injection grout plant. If you are looking for bentonite mixing devices, please contact me.
Construction method of mould grouting for high shear colloidal injection grout plant:
1. Construction preparation: Use a pump to push the second lining repair table to the bentonite mixing device, and the position is stable;
2. Using cement mortar as grouting material, the mixing of cement mortar must have good pouring properties. After consolidation, it has a certain degree of compression, tensile strength and good stability. The mixing of the mortar should be carried out in strict accordance with the mixing ratio specified by the laboratory;
3. After each grouting, the grouting pipe must be flushed with high-pressure water in time to ensure smooth grouting next time.
Use a piston pump to check the effect of high shear colloidal injection grout plant:
Analysis method: Analyze the grouting records, check whether the grouting pressure and grouting amount of each hole meet the design requirements; whether the leakage and running of grouting are serious during grouting, estimate the spreading range of the grout through the grouting amount, and analyze whether the design is consistent.
