jet grouting unit

Key Features of a Jet Grouting Triplex Pump:
High-Pressure Delivery: Jet grouting requires the injection of grout at very high pressures to effectively erode and mix the in-situ soil. A triplex pump is capable of delivering the necessary pressure, often in the range of 20 to 50 MPa (or higher, depending on the specific application).
Consistent Flow Rate: The three cylinders of the triplex pump work in a coordinated manner to ensure a consistent flow rate of grout, which is crucial for maintaining the quality and uniformity of the grout columns.
Durability and Reliability: Jet grouting pumps are subjected to harsh operating conditions, including abrasive grout mixtures and high pressures. A triplex pump is designed to withstand these conditions, with robust construction and high-quality components to ensure long-term reliability.
Adjustable Parameters: The pump should allow for adjustments in pressure, flow rate, and other parameters to accommodate different soil conditions and project requirements.
Efficiency and Performance: A well-designed triplex pump will offer high efficiency and performance, minimizing energy consumption and maximizing the effectiveness of the jet grouting process.

The Jet Grouting Pump is a critical component of the jet grouting system, responsible for delivering the grout under high pressure. The pump must be capable of generating pressures in the range of 20-50 MPa to ensure effective soil erosion and grout penetration. The pump should allow for precise control of the grout flow rate to match the specific requirements of the project (e.g., soil type, desired column diameter).

Grouting mixing and batching plant is a kind of equipment used in foundation treatment projects to mix and proportion grouting materials. It plays an important role in foundation reinforcement technologies such as jet grouting and grouting. The main function of this equipment is to accurately proportion and fully stir cement, water, and other additives to ensure the preparation of uniform slurry that meets construction requirements.

Jet grout mixing equipment is responsible for mixing cement and other additives with water to make a uniform slurry. This slurry is then transported to the injection pipe by a high-pressure pump and injected into the ground to mix with the soil. During the construction process, the jet grout mixer must continue to operate to ensure the consistency and uniformity of the slurry, which is crucial to achieving the strength and permeability required by the design.

A diesel driven jet grouting plant is a jet grouting equipment that uses a diesel engine as a power source. It is mainly used for foundation reinforcement, anti-seepage and plugging in civil engineering, especially in dealing with soft foundations, improving foundation bearing capacity and anti-seepage performance.

Jet grouting equipment is a professional equipment used in engineering fields such as foundation reinforcement and soil improvement. Jet grouting is a construction technology used to reinforce foundations, form underground structures or water-stop curtains. It sprays cement slurry or other chemical solutions into the soil through high pressure, mixes the soil with the slurry, and thus hardens and forms a consolidated body with certain strength and anti-seepage properties.

Regarding the jet grout pump in container, it is a high-pressure grouting pump capable of generating up to 100 bar pressure, mainly used in engineering projects that require high-pressure grouting.

Jet grout pump for double fluid system is a special grouting equipment designed specifically for handling dual fluid grouting systems. This pump is capable of simultaneously or separately processing two fluids (usually high-pressure water and solidifying agents such as cement slurry or other chemical slurries), and injecting them into the rock and soil after mixing them evenly during the grouting process.

Jet grouting pump is a high-pressure grouting equipment mainly used to inject grout (such as cement slurry, chemical grout, etc.) into rock and soil under high pressure to achieve reinforcement, waterproofing, anti-seepage and other purposes. Its characteristics include high pressure, high flow rate, adjustable grouting parameters, and good wear resistance and corrosion resistance.

Jet grouting triple pump refers to a triple pump dedicated to the jet grouting process, which usually consists of three independent pumps, namely a water pump, compressor, and concrete pump.

jet grouting plant is suitable for the manufacture of cement mixtures and cement grouting, it is a compact plant that includes a grout pump, a agitator and a high shear mixer.