Lightweight squeeze hose pump

High Flow Hose Squeeze Pumps For Ceramic are mainly applied in distant conveying, grouting and dosing of viscous slurries in construction, mining, food, paper-making, ceramic, etc. We customize hose pumps for different customers.

Squeeze hose pump is very ideal for pumping foam concrete, it will not damage foam concrete feature. Compared with other kind pump, squeeze hose pump no seals, no valve, dry-running without damage, reversible and only squeeze hose is the only replace part.

Hose pump can be used for pumping oil base mud, heavy fuel oil sludge, and can be used as a sludge pumps & high pressure slurry transfer pumps.

Squeeze hose for foam concrete pump is a tube specially made for foam concrete pump, which satisfies abundant shape recovery and wear resistance. Squeeze hose is mainly divided into a high-elastic and wear-resistant outer layer, an anti-compression interlaced middle layer and a strong and lubricating inner layer. The material is excellent, the processing is fine, and the process is special. Different materials can be adjusted to manufacture pipes for different applications.
Hose for foam concrete pump features:
1. Uniform toughness makes the force more uniform;
2. Special anti-aging formula;
3. Strong shape recovery makes the suction stronger;
4. Internal pressure resistance up to 3MPa;
5. The fine processing size extends the service time;
6. Uniquely suitable for pumping viscous fibers and particles.

large output hose type concrete pump for pumping concrete from china is also name as peristaltic pump, which mainly consists of pump house, rotor, roller, idle roller, squeezes tube and driving unit. The squeeze hose is U-shape in pump house, when rotor drives rollers to rotate, hose is deformed. After the roller rotate, the deformed hose recover by its elasticity. Thus the negative pressure in this hose is generated, sucking slurry, and discharging through outlet under roller’s push, finally forms pressure conveying of slurry.

The working principle of the Peristaltic pump for pumping foam concrete is that a special rubber hose with a smooth inner wall and strong strength is installed inside the pump body. It is kneaded along the hose through a pair of pressure rollers. This rotation causes the medium to be transported in one direction. After the medium is transported, the elasticity of the squeezed hose and the force of the side guide rollers restore the original. At this moment, a high vacuum is generated in the hose to suck the medium into the lumen again, and the medium will follow it. The pressure roller is kneaded and discharged from the hose. In this way, the medium is continuously sucked and discharged.

Squeeze hose peristaltic pump for mortar is a new type of multi-functional, multi-purpose industrial pump developed by absorbing advanced technology. Squeeze hose peristaltic pump for mortar has no sealing, no leakage, strong self-priming ability, simple structure, convenient operation and maintenance. Suitable for conveying a variety of viscosity, density, corrosive, abrasive fluid materials.

peristaltic squeeze pump for conveying concrete and mortar is used for pumping sludge materials, no contact between product and mechanical parts, only squeezes hose to replace. It could be widely used in many project, such as architecture, underground construction, petrochemical industry, metallurgy, food industry, ceramic, mining, water treatment, hydrocarbon sludge pumping etc.

Squeeze hose pump (also called peristaltic pump) is commonly used for pumping grout for soil stabilization and other construction applications. The squeeze hose pump works by squeezing the hose with rotating rollers or shoes, which creates a vacuum that draws the grout into the hose. As the roller or shoe passes over the hose, it squeezes the hose and forces the grout out of the other end.

Only Squeeze Hose To Replace Hot Sale Industrial Peristaltic Pump For Indonesia are mainly applied in distant conveying, grouting and dosing of viscous slurries in construction, mining, food, paper-making, ceramic, etc. We customize hose pumps for different customers.

Squeeze hose pipe consists primarily of an inner rubber layer, middle rubber layer, 2, 4, or 6 layers of steel wire reinforcement, and an outer rubber layer. The inner rubber layer has the function of maintaining the conveyed medium under pressure and protecting the steel wire from corrosion. The outer layer protects the steel wire from damage, while the layer(s) of steel wire (φ0.3-2.0 reinforcing wire) serves as the strengthening effect of the skeleton material.

China is one of the largest peristaltic pump manufacturers in the world, with a large number of peristaltic pump manufacturers. The products provided by these manufacturers are widely used in many industries such as pharmaceuticals, food and beverages, chemicals, and environmental water treatment.

Peristaltic Type Squeeze Concrete Pump is a pump that uses the peristaltic effect to transport concrete. Its working principle is to move concrete in the pipe through a series of sequential squeezing and releasing actions. This pump usually consists of a hopper, a peristaltic hose, a drive device and a control system.
Peristaltic Type Squeeze Concrete Pump is widely used in the following fields:
Construction engineering: used for concrete transportation in high-rise buildings, bridges, tunnels and other projects.
Hydraulic engineering: used for the transportation and pouring of concrete in hydraulic engineering such as dams and hydropower stations.
Underground engineering: used for the transportation and filling of concrete in underground engineering such as subways and underground pipelines.

Hydraulic motor driven squeeze type concrete pump was build based on hose pump, the hydraulic motor driven squeeze type concrete pump uses high pressure, resisting wear squeeze hose with steel wire reinforcement layers, the working pressure is up to 25 bars.

Oem ce heavy duty hose peristaltic pumps for sand cement are mainly applied in distant conveying, grouting and dosing of viscous slurries in construction, mining, food, paper-making, ceramic, etc. We customize hose pumps for different customers.

Industrial Hose Squeeze Pump for Waste Water Applicable Scenarios:
In wastewater treatment, industrial hose squeeze pumps are often used in the following scenarios:
Wastewater transmission: used to transfer wastewater from one place to another, especially when a large amount of wastewater needs to be treated, the pump can provide stable and continuous fluid transmission.
Sludge treatment: Sludge is often produced during wastewater treatment. Industrial hose squeeze pumps can treat sludge containing solid particles and transport it to designated treatment equipment.
Chemical dosing: In the process of wastewater treatment, chemicals are sometimes needed to change the properties of wastewater or remove pollutants. Industrial hose squeeze pumps can accurately control the amount of chemicals added to ensure the effect of wastewater treatment.

Industrial Hose Squeeze Pump for Waste WaterMain features
No pollution: The fluid only contacts the hose, not the pump body, avoiding the contamination of the pump body to the fluid.
High precision: It can accurately control the flow and pressure of the fluid to meet the precise control requirements in the wastewater treatment process.
Low shear force: The shear force on the fluid is small, suitable for conveying shear-sensitive or highly corrosive fluids.
Good sealing: As the only sealing part, the hose can provide a good sealing effect to prevent fluid leakage.
Easy maintenance: The hose is the only vulnerable part of the pump, which is easy to replace and has low maintenance cost.

nice quality hose type concrete pump for pumping concrete are mainly applied in distant conveying, grouting and dosing of viscous slurries in construction, mining, food, paper-making, ceramic, etc. We customize hose pumps for different customers.

A concrete hose pipe with an inner diameter of 75 mm and an outer diameter of 120 mm is a relatively large hose pipe that is designed specifically for handling concrete in construction sites. The larger diameter of the hose allows for the efficient transportation of the viscous and heavy concrete mixture.
The hose is typically made of reinforced rubber or other durable materials to withstand the abrasion and wear that comes with the transportation of concrete. The hose is connected to the concrete pump and run along the construction site to deliver the concrete mixture to the desired location.

Squeeze hose for hose pump has a long service life and a wide range of applications; its structure is a high-strength synthetic fiber braided layer reinforced by one or more layers. The inner and outer linings of the squeeze hose are extruded, and the inner lining is made of A range of compound rubbers. The tube body is soft, full of high-strength elasticity, and has good wear resistance. Synthetic fibers are added to the pipe body to enhance the overall performance of the pipe body, low heat generation during use, good recovery, and durability. The hose has good resistance to positive and negative pressure and has good acid, alkali, oil high temperature, and other characteristics. It can transport more than 90% of today’s chemicals. The main components are natural rubber (resistance to general weak acids and alcohol), nitrile rubber (resistance to grease, alkali metals, and detergents, etc.), and EPDM rubber (suitable for ketones, alcohols, and concentrated acids), etc.

LH series industrial squeeze hose peristaltic pump for mining are mainly applied in distant conveying, grouting and dosing of viscous slurries in construction, mining, food, papermaking, ceramic, etc. LH series industrial squeeze hose peristaltic pump for mining can be used in following field: Construction, pharmacy, textile mill, dye making, water treatment, paper making, mining, ceramic, brewery and beverage, underground engineering, etc.

Oem Supplier Industrial Hose Pump For Oilbase Mud is used for pumping sludge materials, no contact between product and mechanical parts, only squeezes hose to replace.

LH100-915 large working pressure peristaltic pump adopts special process squeeze hose, working pressure could be up to 26bar. Large working pressure peristaltic pump could be used for pumping different materials by changing different materials squeeze hose.

Short Down Time Variable Speed Rotary Peristaltic Pump For Kuwait is known as hose pump and squeeze pump, because of it owning much more advantages than other pumps, such as high self-priming, no seals and valves, dry-running without damage, only tube to replace etc, peristaltic pump application is very wide, for example, construction, pharmacy, textile mill, dye making, water treatment, mining, ceramic, brewery, beverage and TBM project.

Squeeze pipes for concrete pump are a crucial component of concrete pumping equipment. These pipes are made of high-quality rubber and reinforced with high-strength synthetic cords, canvases, and steel wire. They are designed to perform under high temperatures and various levels of pressure, making them suitable for high-performance pumping applications.
One of the distinguishing features of squeeze pipes for concrete pump is their ability to withstand a wide range of pressures and temperatures, making them ideal for use in a variety of construction projects. Due to the high-quality materials used in their construction, squeeze pipes can endure wear and tear caused by abrasive and corrosive materials, ensuring long-lasting performance.

Oem supplier industrial peristaltic concrete pump is a new, multi-functional, multi-purpose industrial pump. It can be used in chemical, petroleum, water treatment, medicine, food, metallurgy, mining, construction, building materials, ceramics, paper-making and other industries.

Industrial peristaltic pump for light weight concrete are mainly applied in distant conveying, grouting and dosing of viscous slurries in construction, mining, food, paper-making, ceramic, etc. We customize hose pumps for different customers.

is known as hose pump and squeeze pump, because of it owning much more advantages than other pumps, such Flow rate can be adjusted peristaltic pump price for Bengal as high self-priming, no seals and valves, dry-running without damage, only tube to replace etc, peristaltic pump application is very wide, for example, construction, pharmacy, textile mill, dye making, water treatment, mining, ceramic, brewery.

Industrial hose squeeze peristaltic pump for mexico customers is a new type, multi-functional, multi-purpose industrial pump developed by absorbing foreign advanced technology. The industrial hose squeeze peristaltic pump for mexico customers completely gets rid of the operation mode of traditional pump impeller and shaft seal, and has great advantages in the transportation of media with high viscosity, high corrosion and large fluid impurities.

Lead Equipment Co., Ltd. is a leading peristaltic pump for pumping foam concrete manufacturer in China, as well as a unique manufacturer with ISO 9001:2008, SGS and CE certificate in China.

Customized Hose Pumps For Pumping Oil Base Mud with so many features, so it was widely used for masonry block filling, wall grouting, hoisting mortar for masonry wall construction; concrete sidewalk and patio slab pumping, pumping foam concrete, lightweight foam concrete, mortar and refractory materials etc.