Squeeze type industrial hose pump for grouting cement

Squeeze hose pump (also called peristaltic pump) is commonly used for pumping grout for soil stabilization and other construction applications. The squeeze hose pump works by squeezing the hose with rotating rollers or shoes, which creates a vacuum that draws the grout into the hose. As the roller or shoe passes over the hose, it squeezes the hose and forces the grout out of the other end.

High Pressure Hose Squeeze Pump is also name as peristaltic pump, which mainly consists of pump house, rotor, roller, idle roller, squeezes tube and driving unit. The squeeze hose is U-shape in pump house, when rotor drives rollers to rotate, hose is deformed. After the roller rotate, the deformed hose recover by its elasticity. Thus the negative pressure in this hose is generated, sucking slurry, and discharging through outlet under roller’s push, finally forms pressure conveying of slurry.

LH100-915 large working pressure peristaltic pump adopts special process squeeze hose, working pressure could be up to 26bar. Large working pressure peristaltic pump could be used for pumping different materials by changing different materials squeeze hose.

Industrial Hose Squeeze Pump for Waste Water Applicable Scenarios:
In wastewater treatment, industrial hose squeeze pumps are often used in the following scenarios:
Wastewater transmission: used to transfer wastewater from one place to another, especially when a large amount of wastewater needs to be treated, the pump can provide stable and continuous fluid transmission.
Sludge treatment: Sludge is often produced during wastewater treatment. Industrial hose squeeze pumps can treat sludge containing solid particles and transport it to designated treatment equipment.
Chemical dosing: In the process of wastewater treatment, chemicals are sometimes needed to change the properties of wastewater or remove pollutants. Industrial hose squeeze pumps can accurately control the amount of chemicals added to ensure the effect of wastewater treatment.

Industrial Hose Squeeze Pump for Waste WaterMain features
No pollution: The fluid only contacts the hose, not the pump body, avoiding the contamination of the pump body to the fluid.
High precision: It can accurately control the flow and pressure of the fluid to meet the precise control requirements in the wastewater treatment process.
Low shear force: The shear force on the fluid is small, suitable for conveying shear-sensitive or highly corrosive fluids.
Good sealing: As the only sealing part, the hose can provide a good sealing effect to prevent fluid leakage.
Easy maintenance: The hose is the only vulnerable part of the pump, which is easy to replace and has low maintenance cost.

Variable speed rotary peristaltic pump for kuwait is also name as peristaltic pump, which consists mainly of pump house, rotor, roller, idle roller, squeezes tube and driving unit. The squeeze hose is U-shape in pump house, when rotor drives rollers to rotate, hose is deformed. After the roller rotate, the deformed hose recover by its elasticity. Thus the negative pressure in this hose is generated, sucking slurry, and discharging through outlet under roller’s push, finally forms pressure conveying of slurry.

Electric peristaltic pump for mining is mainly used for pump materials through two roller or pressure shoe rotating clockwise squeezing hose. Thus the negative pressure in this hose is generated, sucking slurries, and discharging through outlet under rollers’ push, finally forms pressure conveying of slurries.

Our industrial hose pump in the subway successful application in Zhengzhou industrial hose pump shield construction site in the metro line 2, in the process of shield tunneling on slurry transportation play an important role.

Electric peristaltic hose pumps for waste water is a new, multi-functional, multi-purpose industrial pump. It can be used in chemical, petroleum, water treatment, medicine, food, metallurgy, mining, construction, building materials, ceramics, paper-making and other industries.

Heavy duty hose pump for grouting cement is based on the operating characteristics of the pump hose, heavy duty peristaltic pump have much more advantage than other type pump.

Squeeze Type Industrial Hose Peristaltic Pump For Pumping Foam Concrete consists mainly of pump house, rotor, roller, idle roller, squeeze tube and driving unit. The squeeze hose is U-shape in pump house, when rotor drives roller to rotate, hose is deformed. After the roller rotate, the deformed hose recover by its elasticity. Thus the negative pressure in this hose is generated, sucking slurries, and discharging through outlet under roller’s push, finally forms pressure conveying of slurries.

Popular Multifunction Hose Peristaltic Pump For Pumping Mortar is a new, multi-functional, multi-purpose industrial pump. It can be used in chemical, petroleum, water treatment, medicine, food, metallurgy, mining, construction, building materials, ceramics, paper-making and other industries.

LH series popular multi function hose peristaltic pumps are mainly applied in distant conveying, grouting and dosing of viscous slurries in construction, mining, food, papermaking, ceramic, etc.

LH series industrial squeeze hose peristaltic pump for mining are mainly applied in distant conveying, grouting and dosing of viscous slurries in construction, mining, food, papermaking, ceramic, etc. LH series industrial squeeze hose peristaltic pump for mining can be used in following field: Construction, pharmacy, textile mill, dye making, water treatment, paper making, mining, ceramic, brewery and beverage, underground engineering, etc.

Peristaltic pumps consists mainly of pump house, rotor, roller, idle roller, squeeze hose and driving unit. The squeeze hose is U-shape in pump house, when rotor drives roller to rotate, hose is deformed. After the roller rotate, the deformed hose recover by its elasticity. Thus th e negative pressure in this hose is generated, sucking slurries, and discharging through outlet under roller’s push, finally forms pressure conveying of slurries.

The working principle of the Peristaltic pump for pumping foam concrete is that a special rubber hose with a smooth inner wall and strong strength is installed inside the pump body. It is kneaded along the hose through a pair of pressure rollers. This rotation causes the medium to be transported in one direction. After the medium is transported, the elasticity of the squeezed hose and the force of the side guide rollers restore the original. At this moment, a high vacuum is generated in the hose to suck the medium into the lumen again, and the medium will follow it. The pressure roller is kneaded and discharged from the hose. In this way, the medium is continuously sucked and discharged.

Tunneling Machine Industrial Hose Pump successful application in Zhengzhou industrial hose pump shield construction site in the metro line 2, in the process of shield tunneling on slurry transportation play an important role.
Leacrete

No seals food industrial peristaltic pump for pumping refractory materials could be widely used in many project, such as architecture, underground construction, petrochemical industry, metallurgy, food industry, ceramic, mining, water treatment, hydrocarbon sludge pumping etc.

We are hose peristaltic pump manufacturer specialized in R & D, manufacture and sale. We have developed full series of products with tens of models now, working pressure from 0.6-3 Mpa, output from 0.01-50 m3/h.NR, NBR and EPDM squeeze hoses are available for customization. And we also can customize hose peristaltic pump for sale.

Squeeze pipes for concrete pump are a crucial component of concrete pumping equipment. These pipes are made of high-quality rubber and reinforced with high-strength synthetic cords, canvases, and steel wire. They are designed to perform under high temperatures and various levels of pressure, making them suitable for high-performance pumping applications.
One of the distinguishing features of squeeze pipes for concrete pump is their ability to withstand a wide range of pressures and temperatures, making them ideal for use in a variety of construction projects. Due to the high-quality materials used in their construction, squeeze pipes can endure wear and tear caused by abrasive and corrosive materials, ensuring long-lasting performance.

Competitive Price Peristaltic Pump For Pumping Foam Concrete is also name as peristaltic pump, which consists mainly of pump house, rotor, roller, idle roller, squeezes tube and driving unit. The squeeze hose is U-shape in pump house, when rotor drives rollers to rotate, hose is deformed. After the roller rotate, the deformed hose recover by its elasticity. Thus the negative pressure in this hose is generated, sucking slurry, and discharging through outlet under roller’s push, finally forms pressure conveying of slurry.

Oem supplier industrial peristaltic concrete pump is a new, multi-functional, multi-purpose industrial pump. It can be used in chemical, petroleum, water treatment, medicine, food, metallurgy, mining, construction, building materials, ceramics, paper-making and other industries.

The hose squeeze pumps for mining is a sealless design that eliminates leakage and product contamination, allowing it to handle some of the most demanding pumping applications in the mining industry.

Factory price peristaltic pump head with hopper is known as hose pump and squeeze pump, because of it owning much more advantages than other pumps, such as high self-priming, no seals and valves, dry-running without damage, only tube to replace etc, peristaltic pump application is very wide, for example, construction, pharmacy, textile mill, dye making, water treatment, mining, ceramic, brewery, beverage and TBM project.

Easy operate peristaltic pump for pumping mortar is also name as peristaltic pump, which consists mainly of pump house, rotor, roller, idle roller, squeezes tube and driving unit. The squeeze hose is U-shape in pump house, when rotor drives rollers to rotate, hose is deformed. After the roller rotate, the deformed hose recover by its elasticity. Thus the negative pressure in this hose is generated, sucking slurry, and discharging through outlet under roller’s push, finally forms pressure conveying of slurry.

Leadcrete is a leading manufacturer of tube spare parts for squeeze pumps, made from high-quality compounded rubbers and reinforced with braided nylon for superior durability. These parts are designed to handle the high pressure and flow rates required for tough applications such as the delivery of slurry, cement mortar, and other abrasive materials.

Self-priming Big Flow Rate Industrial Peristaltic Pump For Pakistan are mainly applied in distant conveying, grouting and dosing of viscous slurries in construction, mining, food, paper-making, ceramic, etc. We customize hose pumps for different customers.

Could Reverse Industrial Squeeze Dosing Pump For Nepal is used for pumping sludge materials, no contact between the product and mechanical parts only squeezes hose to replace.

Nylon Reinforcement Layer Chemically Resistant Peristaltic Rubber Hose Pump Manufacturers are mainly applied in distant conveying, grouting and dosing of viscous slurries in construction, mining, food, paper-making, ceramic, etc. We customize hose pumps for different customers.

High flow rate peristaltic pump with rubber hose consists mainly of pump house, rotor, roller, idle roller, squeeze hose and driving unit. The squeeze hose is U-shape in pump house, when rotor drives roller to rotate, hose is deformed. After the roller rotate, the deformed hose recover by its elasticity. Thus th e negative pressure in this hose is generated, sucking slurries, and discharging through outlet under roller’s push, finally forms pressure conveying of slurries. 

Customized hose pumps for pumping oil base mud can be used for pumping oil sludge, heavy fuel oil sludge, and can be used as a sludge pumps & high pressure slurry transfer pumps.