(English)
Tel: 86-18538591025
Email:sales1@leadcrete.com
Your position: Home > News > Product News
Diesel jet grouting system with LGP250/450-260D pump
date: 2026-11-18

450 Bar Diesel Jet Grouting System

A 450 bar diesel jet grouting system must be selected around the required operating pressure and grout flow. The high-pressure pump, grout preparation equipment and delivery circuit need to work together: a pump with a suitable pressure rating can still face supply interruptions if the mixing process cannot maintain its inlet feed.

The Leadcrete LGP250/450-260D diesel jet grouting pump provides a reference for evaluating this arrangement. Its published specifications identify a 260 HP diesel engine and a three-cylinder, single-acting reciprocating plunger pump, with maximum output of 250 L/min and maximum pressure of 450 bar. These figures are based on water testing and require further verification against the intended grout and operating duty.

450 bar grout pump

Confirm the Pressure-Flow Combination

Maximum pressure and maximum flow are separate selection limits. A specification listing both does not establish that the pump can deliver maximum flow at maximum pressure.

For a high-pressure jet grouting pump, the useful purchasing information is the available flow at the required operating pressure. This working point must be checked against the proposed drive setting and the material being pumped. Cement grout characteristics can differ from those of the water used for catalogue testing.

The pressure reference also matters. A requirement measured at the pump outlet differs from one specified at the injection nozzle. Hoses, fittings and the delivery path introduce pressure losses, so the enquiry should identify both the required pressure and its measurement location.

The LGP250/450-260D has a published maximum pressure of 450 bar. If the project requires a 500 bar pump operating pressure, its public specifications do not demonstrate compliance. That requirement needs a separate equipment assessment.
diesel driven grout pump

Match Grout Preparation to Pump Consumption

A diesel-driven grout pump performs the pumping stage; it does not determine how quickly usable grout can be prepared.

For a batch-based grout mixing and pumping system, supply planning should include water measurement, powder charging, mixing, transfer and any material conditioning required by the approved mix procedure. Dividing tank capacity by mixing time alone overlooks the other parts of the cycle.

A holding agitator can provide a buffer while the next batch is prepared. Its useful contribution depends on the available working volume and the pump’s actual consumption. Nominal tank capacity should therefore not be treated as the volume available for uninterrupted pumping.

The connection between the holding vessel and pump inlet also needs review. The proposed layout should allow the required feed and provide access for inspection and cleaning. Any inlet screening must suit the material and pump requirements; an unsuitable restriction can interfere with supply.

diesel jet grouting system

Define What Diesel Power Covers

Diesel power can suit the high-pressure pumping stage where an appropriate electrical supply is unavailable. However, a diesel jet grouting pump does not establish that every part of the installation operates independently of site electricity.

The grout mixer, agitator, water supply equipment and powder handling arrangement may have different power requirements. These should be listed separately when defining the package.

For example, a diesel pump supplied alongside an electric mixer still requires a suitable electrical source for grout production. If a generator is proposed, its selection should account for the connected equipment and starting requirements. Clarifying these interfaces before quotation helps determine whether the proposed system can operate with the utilities actually available on site.

Coordinate the Pump with the Jetting Operation

A triplex plunger grout pump supplies high-pressure fluid, but its pressure rating alone cannot determine the resulting soil-cement column dimensions or treatment outcome.

The jetting arrangement, grout specification, ground conditions and approved operating parameters all influence the construction process. Pump selection should follow those requirements rather than introduce unverified nozzle sizes, withdrawal speeds or injection pressures.

During planning, define how the operator will coordinate pumping with the drilling rig and manage pauses or interruptions. A high-pressure cement grout pump also needs a compatible delivery circuit, pressure protection and an approved procedure for depressurizing before maintenance or cleaning. These arrangements belong in the system review, alongside pump performance.

high pressure jet grouting pump

Request a Defined Equipment Package

When comparing jet grouting equipment, specify whether the quotation should cover the pump alone or include preparation, holding and connecting equipment. The equipment list should identify included components and the interfaces that the contractor must provide.

jet grouting equipment
triplex plunger grout pump

To enquire about a Leadcrete 450 bar diesel jet grouting system using the LGP250/450-260D, send:

  • Required operating pressure and flow, including the pressure measurement location.
  • Grout composition, mix proportions and relevant material properties.
  • Proposed hose route, length and elevation difference.
  • Available site utilities and installation space.
  • Required supply scope, including mixing, agitation and connecting equipment.

Send these details to sales1@leadcrete.com so the quotation can address the intended operating duty and equipment boundaries.



Inquiry
Please feel free to submit your inquiry information to us. We will contact with you as soon as possible.
Name:
Country:
Email:*
Phone:
Inquiry:*