United ipinle (English)
Home » Grout Equipment » Grout Pump » Soil Reinforcement Grout Injection Pump

Soil Reinforcement Grout Injection Pump

The Leadcrete LGP250/450-260D soil reinforcement grout injection pump features a 260 HP Cummins diesel engine and a three-plunger pumping unit. Its maximum ratings are 450 bar and 250 L/min. Select the working configuration according to the soil treatment method, grout formulation, delivery conditions, and required injection control.

Rated 4.6/5 based on 266 customer reviews
Share:
Next:
This is already the latest article
  Content   2026-11-20

Soil Reinforcement Grout Injection Pump

A soil reinforcement grout injection pump delivers prepared grout as part of an engineered ground treatment process. Selecting the equipment requires a clear understanding of how the grout will interact with the soil, what pressure the construction method permits, and how much material must be injected.

The Leadcrete LGP250/450-260D is a diesel-driven, three-plunger pump for high-pressure grout delivery. Contractors should evaluate it together with the mixing plant, delivery line, drilling equipment, and monitoring requirements to establish a suitable working configuration.

soil stabilization grout pump
soil stabilization grout pump

Define How the Soil Will Be Treated

Soil reinforcement covers several construction methods with different pumping requirements. Permeation grouting introduces suitable grout into accessible pores. Compaction grouting uses a different material behavior and displacement mechanism. Jet grouting breaks up and mixes soil through high-velocity fluid jets.

A soil reinforcement grout injection pump should therefore be selected after the treatment method is defined. Equipment suitable for high-pressure jet grouting should not automatically be treated as suitable for every grout or injection process.

Provide the ground treatment specification and intended material when requesting a proposal.

Review the Diesel Pump Configuration

The upgraded LGP250/450-260D combines a 260 HP Cummins QSB6.7-260C diesel engine with a four-speed hydrodynamic transmission. Its GP250/450 main pump uses three 75 mm plungers in a reciprocating, single-acting arrangement.

Diesel drive provides an option where the site lacks a suitable electrical supply for the main pumping duty. Installation planning should include ventilation, exhaust clearance, fuel access, and space for servicing.

ground improvement injection pump
ground improvement injection pump

Technical Parameters

Parameter Specification
Model LGP250/450-260D
Diesel engine Cummins QSB6.7-260C
Engine power 260 HP
Maximum engine speed 2,200 r/min
Transmission Hydrodynamic transmission
Transmission speeds 4
Main pump GP250/450
Pump action Reciprocating, single-acting plunger
Number of plungers 3
Plunger diameter 75 mm
Maximum output 250 L/min
Maximum pressure 450 bar / 45 MPa
Inlet diameter 3 inches
Outlet diameter 1¼ inches
Overall dimensions, L × W × H 5,750 × 2,230 × 2,300 mm
Weight 8,050 kg

Performance note: Published data are based on water testing. Confirm the required pressure–flow combination for the proposed grout. Maximum pressure and maximum flow should not be assumed to occur simultaneously.

Specify Working Pressure and Delivery Rate Together

A useful soil reinforcement grout injection pump specification states the required flow at a defined working pressure. It should also identify where that pressure is measured and how long the operating condition must be maintained.

The maximum pump rating is not the default injection setting. The permitted working pressure depends on the construction method, ground conditions, and project design.

For staged injection, describe the expected operating range and control requirements. Where low delivery rates are needed, confirm the available adjustment range and control resolution rather than selecting equipment solely by its maximum output.

Confirm Grout Compatibility Before Selection

Grout properties influence mixing, suction, pumping, and cleaning requirements. Provide the water-to-cement ratio, additives, expected density, viscosity information, and maximum particle size where available.

Explain whether the mixture changes during construction. A formulation that pumps satisfactorily in one stage may require a different operating arrangement in another.

For a soil reinforcement grout injection pump, material compatibility must be assessed separately from pressure capability. Stiff mixes, rapid-setting materials, and chemically reactive grouts require specific review before equipment suitability can be established.

Coordinate Preparation with Injection Demand

The grout preparation system must support the planned injection sequence. Assess its actual production cycle, including dosing, cement feeding, mixing, and transfer.

For example, an illustrative operating flow of 100 L/min consumes 6 m³/h during uninterrupted pumping. If prepared grout replenishment falls below that rate, stored material will gradually be depleted.

An agitator provides a buffer between mixing and injection. Its usable volume should be reviewed against batch size, replenishment time, and peak consumption. Tank capacity alone does not establish sustainable production.

Soil reinforcement grout injection pump
Soil reinforcement grout injection pump

Assess the Delivery Line and Measurement Points

The soil reinforcement grout injection pump must work with the complete delivery system. Review hose length, internal diameter, elevation changes, fittings, and component pressure ratings.

Item to Confirm Why It Matters
Pressure measurement location Distinguishes pump discharge pressure from downstream conditions
Hose length and diameter Helps assess pressure losses and material delivery
Grout formulation Supports compatibility and pumping review
Required operating duration Establishes the intended continuous duty
Recording requirements Defines measurement and reporting functions

Confirm these details before finalizing the equipment configuration.

Plan Site Access and Maintenance

The containerized pump arrangement requires suitable transport access, lifting provisions, and ground support. Allow clearance for opening service panels and inspecting the engine, transmission, pump, and connections.

Position mixing and storage equipment to provide a practical suction route. Include access for cleaning and handling residual grout.

The quotation should identify the complete supply scope. Mixers, agitators, external hoses, drilling tools, and recording equipment should each be specified rather than assumed to be included.

Discuss Your Soil Reinforcement Pump Requirements

To request a soil reinforcement grout injection pump proposal from Leadcrete, provide:

  • Soil treatment method and project objective.
  • Required working pressure, flow, and measurement location.
  • Grout formulation and material properties.
  • Delivery distance, operating schedule, and preparation capacity.
  • Site layout, monitoring requirements, and supply scope.

Contact sales1@leadcrete.com to discuss the LGP250/450-260D and the configuration required for your ground treatment project.

Inquiry
* Name:
* Email:
Country:
Tel:
* Message:
More Grout Pump