30m3/h Grout Mixing Plant
30m³/h Grout Mixing Plant is the core equipment used in the engineering field for the efficient preparation and transportation of cement-based grouting materials. It is widely used in tunnel support, foundation reinforcement, mine filling and other scenarios.
30m³/h Grout Mixing Plant is the core equipment for the efficient preparation and transportation of cement-based grouting materials in the engineering field. It can operate continuously and supports 24-hour operation, but it needs to be stopped every 8 hours to check the wear of the mixing blades (the blade life is about 800 hours) and the sealing of the pumping system (the replacement cycle of the plunger pump seal is about 500 hours).
30m3/h grout mixing plant supports containerized transportation and is suitable for projects in overseas or remote areas.
30m3/h grout mixing plant typical application scenarios:
Tunnel and mining engineering
Used for advanced small-duct grouting, curtain water stopping and other processes, the slurry density is adjustable from 1.2 to 1.8 g/cm³ to meet the needs of different strata.
Case: A subway project uses this equipment, with a daily grouting volume of 240 m³ and a 30% reduction in construction period.
Foundation reinforcement and slope management
During the construction of high-pressure jet grouting piles, the pumping pressure is stable at 12-15 MPa, and the slurry diffusion radius is ≥ 1.2 m.
Case: In a landslide control project, the equipment ran continuously for 72 hours without failure, and the grouting density reached more than 98%.
Environmental protection and resource utilization
Support the reuse of solid waste such as tailings and construction waste, and reduce the cost by 20%-30% by adjusting the formula to prepare grouting materials.
